Question about 2000 Mercedes-Benz E-Class

Open Question

My Mercedes E320 year 2000....radio turns on by itself intermittently..any quick solutions, ie, pulling the radio out..This is for a trip of about 1000 miles and I don't want to be stuck.. Battery

As explained in problem summary.....CD changer in trunk appears not to be working, and tape deck tries to eject but is unsuccessful...Radio works but, again, has a tendancy to turn on intermittently without user input. Long trip ahead,,,,concerned about battery, though it is a brand new Interstate.

Posted by on

  • Mark Sumner
    Mark Sumner Nov 20, 2012

    Speakers and sound work perfectly with radio on..addendum to my original question Thanks.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 43 Answers

SOURCE: radio audio muted and cd changer gives message no cd changer c320

Hi, Joe here to help. The cd changer is at fault. You need to replace the changer. The system is on a fiber optic loop which cuts out the sound if can not complete that loop.

Posted on Apr 08, 2009

jasperoni
  • 203 Answers

SOURCE: no CD Changer display

This system is very complicated and unfortunatly you need a scan tool and a d2b ring tester unless you are very familiar with the fibre optic ring set up for this vehicle. most likley your c.d. player is defective-is their also a phone and do you have sound from the speakers when operating normal radio function

Posted on May 29, 2009

lastech
  • 408 Answers

SOURCE: ABS light intermittent on 1995 Mercedes C280

hello,good day,try to clean your abs sensor and rotor,apply with wd 40 then cean with compress air,also check electrical connection,for your radio please recheck the power supply specially the parking light wiring,ty

Posted on Aug 15, 2009

steve_e_uk
  • 1675 Answers

SOURCE: 1995 Mercedes Benz S420 battery was dead for four

hi i have instructions for this reprogramming if you want them there are a few different ways, types of key etc, so if i email you the information that would be quicker than trying to type it all on here , plus not allot of room for it lol...if you still need the info email me at
s.e.morris@hotmail.co.uk
and will email you back with info..ok

Posted on May 29, 2010

duane_wong
  • 6826 Answers

SOURCE: I have an 1996 Mercedes e320. I have replaced the

http://www.radio-code.com/Mercedes-Pay-Page-radio-code.htm

I found this page but I haven't tried it to know if it's right for your radio code or how much it costs.

Posted on Jul 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Radio in 2004 mercedes benz E320 stoped working


Sounds like something shorted out to me. Could be the radio itself or any of the wiring that goes to the radio..

Jun 02, 2012 | Mercedes-Benz E320 Cars & Trucks

1 Answer

How to replace an engine belt on an 1995


I have two Mercedes - one is 2000 E320 Wagon; other is 1999 E320 Sedan.

I replaced the serpentine belt on my 2000 Wagon today at 92,000 miles. I found that the Motorcraft JK6-947 could be purchased on Ebay for $12.99 plus $6.20 shipping. The old belt was a Goodyear Gatorback 4060940. My 1999 sedan has a Mercedes Benz 011 997 97 92 6K2390 EM7117 Gates belt made in Spain.

Here are the details of replacing the belt.

On the 2000 E320, a 17 mm bolt just under the belt going to the tension pulley will release the belt tension when turned counterclockwise. Removal of the belt was easy after using a 17 mm deep socket wrench similar to a spark plug socket. I made turning the bolt very easy by slipping a 4' pipe over the socket wrench handle. It is advisable to put the new belt LAST on the idler pulley that contacts the belt only on the smooth side.

You do not need todisturb theButton Torx bolt in the center of the tension pully.

The 1999 E320 uses a 15 mm bolt in the CENTER of the tension pulley. Otherwise the installation is the same as the 2000 E320.

Jan 19, 2011 | 1995 Mercedes-Benz E-Class

1 Answer

Need radio code for 1995 Mercedes Benz E320 sedan


Its inside your car manual on the left side as you open it up, it'll be a lil grey card that will have the radio code written on it... read the manual and it'll tell you how to put the numbers in.

Mar 16, 2010 | 2007 Mercedes-Benz E320 BLUETEC Sedan

1 Answer

How do I remove my 1997 Mercedes E320 factory radio


the radio should pull right out. use 2 picks to grab the sides and pull gently.

Jan 28, 2010 | 1997 Mercedes-Benz E-Class

3 Answers

How to reset srs light on 1996 e320 mercedes benz


try disconecting negative battery terminal for a few seconds

Aug 23, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

ABS light intermittent on 1995 Mercedes C280


hello,good day,try to clean your abs sensor and rotor,apply with wd 40 then cean with compress air,also check electrical connection,for your radio please recheck the power supply specially the parking light wiring,ty

Jul 02, 2009 | 1994 Mercedes-Benz C-Class

2 Answers

Belt routing diagram for a 2005 E320 mercedes benz


Hello I'm a M.B. tech. As long as it is original there is no amplifier other than the head unit itself. The only tricky part is getting the antenna to work with the new head unit. Take a test light and find which wire is hot all the time. That will be your circuit 30 wire(radio memmory). Next turn key to position 2 and find your wire( one is for the antenna and the other is for your radio operation) and isolate those 2 wires,. Find your ground wire and those are your basic connections. There is a fader switch in your center console wood. the head unit sends its power ther and it is dispursed to the appropiate speakers(it is also a common problrm when you have no sound. Try to pop the switch up carefully with a flat blade screwdriver. If not pop up the shifter trim ring and pull up on the console wood. You may have to remove the ashtray. It is a fairly simple install hopefully my advice has been helpful.

Oct 30, 2008 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

Not finding what you are looking for?
2000 Mercedes-Benz E-Class Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...