Question about Toyota Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would highly recommend that you go to the local parts store and purchase a Haynes Manual for your vehicle, they are around $ 25.00 Canadian. As when you do your head gasket you wil need to remove your timing belt and this is a procedure in it's self. then you will neen certain torque settings. This manual will provide you with all of this information step by step. they are designed for the do it yourselfer. They also cover many other issues that you may come across through out the ownership of your vehicle. I know that the last ting you need is an added exspence but these manuals are well worth the small investment. There is a site that you can find hrough google search that you can find factory service repair manuals for your vehicle, however they only have a layout for a 4 cylinder engine in there drawings and this is alot different then the 6 cylinder. As the procedure for repairs is totally different. I hope that this helps and that you take the time to rate any solutions you receive. Good Luck.
Posted on Oct 29, 2008
I found that it is embarrassingly obvious once you get the parts and place them in position. Each belt only fits the appropriate pulley in width and length. When the belt breaks there's no visual reference (as one would have if he replaced the belts before they broke!) if the belt diagram is worn off the hood. Lesson learned; replace belts- a simple task- before they break!
Posted on Nov 19, 2008
SOURCE: can i adjust the clutch
there are only two adjustment you can make on a hydraulic clutch set up and that is pedal hight and free play. To adjust pedal hight you rotate pedal stop bolt at top of pedal assembly to adjust the hight. To adjust freeplay you loosen the lock nut at the master cylinder pushrod and turn push rod in or out to the specified freeplay then you tighten everything back up
Posted on Feb 07, 2011
my brake lights are not working. i have tested the brake switch and no power- also done a cont test between brake switch wire at the lamp and the switch and open circuit. the brake is befor the switch..-- does it go to a relay befor the fuse??
Posted on Jun 18, 2011
Tips for a great answer:
Mar 26, 2017 | Ford Cars & Trucks
Jan 19, 2014 | Cars & Trucks
Feb 07, 2011 | 1990 Toyota Land Cruiser
Sep 04, 2010 | 2007 Toyota Tundra
Apr 13, 2010 | 1990 Toyota Celica
Nov 04, 2009 | 1990 Toyota Pickup
Sep 20, 2009 | 1991 Toyota Camry
Nov 17, 2008 | 1990 Toyota Pickup
22 people viewed this question
Usually answered in minutes!