Question about Chrysler Cars & Trucks
Does this if ac is turned on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
PO108 (map circuit high input) MAP is manifold absolute pressure... a sensor normally mounted on the intake. your code is suggesting a problem with this sensor, or its circuitry.
Posted on May 11, 2009
P0440 and P0441 are refering to the NVLD pump. It is in the rear on the right side up near the fuel tank. P0344 is your cam position sensor on the rear (drivers side) of the cylinder head. The P0440 and 441 are probably why the check engine light is on and the 344 was stored from a previous event. Either way they are two different and unrelated problems. The NVLD (natural vacuum leak detection) pump is an emission item with no effect of the way it runs however it will keep the engine light on. The cam sensor will keep it from starting or intermittently run bad and not necessarily turn the light on. Both parts are easy to change. I hope this helps.
Posted on May 19, 2009
my old amns cruiser has the same problem i'm putting it down to loss of turbo pressure as the inlet manifold is leaking when reved
i'll let you know when manifold is replaced if it cures it
Posted on Sep 09, 2009
SOURCE: "Check Engine light"
The issue is that the system randomly checks the loop of the fuel system to confirm that it has no leaks. A missing cap is the easy one to correct. It might also be a slpit in the rubber hose that connects the fuel fill tube (on the chassis) to the one on the tank, or any other hose in the the entire fuel delivery/ fume recovery sysrtem. The solenoid that allows the engine's vacuum to be used to conduct this test can also be sticking so that after the test cycle, it doesn't reclose. Good luck
Posted on Dec 10, 2009
Tips for a great answer:
Oct 15, 2015 | 2003 Chrysler PT Cruiser
Nov 06, 2012 | Cars & Trucks
Aug 21, 2012 | Chrysler Cars & Trucks
Jul 31, 2010 | 2004 Chrysler PT Cruiser
May 21, 2010 | 2003 Chrysler PT Cruiser
Jun 26, 2009 | 2003 Chrysler PT Cruiser
Jun 25, 2009 | 2003 Chrysler PT Cruiser
May 19, 2009 | 2003 Chrysler PT Cruiser
Sep 24, 2008 | 2003 Chrysler PT Cruiser
Sep 24, 2017 | Chrysler Cars & Trucks
125 people viewed this question
Usually answered in minutes!