Question about Volkswagen Cars & Trucks

Open Question

Howe to remove oil filter housing jetta 2013 - Volkswagen Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bbtoast
  • 319 Answers

SOURCE: Changing the Oil Filter on 2005 Jetta 2.5L Gas Engine

Is this the valve that you are speaking of?

http://www.toolsource.com/filter-housing-drain-audi-p-99593.html

Let me know,

Brian

Posted on Aug 11, 2008

  • 651 Answers

SOURCE: oil drain 2007 volkswagon jetta 2.5 sedan

on the bottom of the oil pan is a bolt you have to take off.

Posted on Jan 06, 2009

  • 100 Answers

SOURCE: 2007 Jetta 2.5L: how to change oil filter

Usually with draining the oil filters you just screw it off and the oil will drain. It can sometimes be messy but thry to keep your arm out of the way and have the oil pan at the bottom. If some gets on the engine or header pick up some break clean and spray off the remaining oil that made a mess and it should come all clean like you didn't even spill any oil!

Good Luck!

Posted on Aug 13, 2009

  • 247 Answers

SOURCE: Need to remove oil filter housing - oil leaking

This is not an easy repair in your driveway, but can be done. 1st thing, have you checked to see if the oil filter is the issue or is it the drain plug? If its the oil filter housing gasket, you will need to remove the filter. The housing is held in place by the threaded bolt assy that the filter screws onto. You will need to remove that bolt, remove the coolant hoses. Clean the engine block surfaces, for the new gasket to mate to, clean the cooling housing surfaces, install the bolt through the housing, and install the gasket onto it. Then install the bolt/housing into the block and tighten the bolt. Install the coolant hoses, oil filter. Fill the cooling system with the coolant that you removed. Fill the engine with oil, start and check for leaks.

Posted on Jan 23, 2010

  • 22 Answers

SOURCE: 1996 Volkswagon Jetta GLS oil leak around the oil filter housing

there really isnt one it is not hard to figure out just take it off and look at it youll figure it out

Posted on Feb 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change leaking oil filter housing O-Ring on 1997 VW Jetta 2.0 Gas


Remove the filter. Remove the center stud that the filter threads on to. Remove the cooler. Remove the old oring.

Jan 09, 2015 | 1997 Volkswagen Jetta

1 Answer

How to Replace leaking Oil filter housing 1997 VW Jetta 2.0 Gas


Remove the oil filter and there is a nut that you take off (same threads as oil filter) the oil filter adapter will become loose, continue to slide it off, on the engine side of the adapter is the O-Ring, replace the o-ring and install in reverse order.

Jan 09, 2015 | 1997 Volkswagen Jetta

1 Answer

Oil is leaking from top of oil filter. how do I remove this part and replace. please. thanks you


TAKE OIL FILTER OFF,HOUSING SHOULD HAVE 2OR 3BOLTS REMOVE THEM AND REPLACE THE O'RINGS AND GASKET.










TIM

Jan 15, 2011 | 1997 Volkswagen Jetta

2 Answers

How do i repair oil filter housing leak?


The oil is most likely leaking from the oil cooler seal. The oil cooler is the square aluminum piece that the oil filter screws onto. To replace the seal, remove the filter, remove both coolant hoses that attach to the cooler, remove the nut that secures the cooler to the block and slide the cooler off the tube. Replace the rubber o-ring seal which is available at the VW dealer. It's inexpensive. Replace everything in reverse order. Good luck!

Dec 28, 2010 | 1997 Volkswagen Jetta

1 Answer

How to change air filter on a 2002 jetta tdi


Air filter changement for 2002 VW Jetta 1.9 TDI:
1. Unplug MAF Connector.
2. Unscrew two Air Filter Housing screws - Phillips driver.
3. Screws do not come out fully. They remain loose in the Housing.
4. Remove Air Filter Housing. Lift up/towards. Rest on battery cover.
5. Remove old Air Filter.
6. Clean Filter Housing. Damp cloth.
7. Check upper half of cover too.
8. Insert new Air Filter. Ensure the edges are seated.
9. Reposition Filter Housing. Clips on leading edge down/in first.
10. Two screws (don't overtighten).
11. Reconnect MAF plug.


ad58f60.jpg

Aug 30, 2010 | 2002 Volkswagen Jetta TDI

1 Answer

Need to remove oil filter housing - oil leaking out. How do you remove it? Bolt location, etc. The car just dumped almost all it's oil in the driveway while it was idling. The leak appears to be around the...


This is not an easy repair in your driveway, but can be done. 1st thing, have you checked to see if the oil filter is the issue or is it the drain plug? If its the oil filter housing gasket, you will need to remove the filter. The housing is held in place by the threaded bolt assy that the filter screws onto. You will need to remove that bolt, remove the coolant hoses. Clean the engine block surfaces, for the new gasket to mate to, clean the cooling housing surfaces, install the bolt through the housing, and install the gasket onto it. Then install the bolt/housing into the block and tighten the bolt. Install the coolant hoses, oil filter. Fill the cooling system with the coolant that you removed. Fill the engine with oil, start and check for leaks.

Jan 23, 2010 | 1997 Volkswagen Jetta

1 Answer

Cant get the oil filter housing off


Jetta GLI figuring it's a VR6 use a 6 mm allen socket to remove the drain plug to empty the oil and reinstall it. The use a 36 mm socket to remove the oil filter housing, replace the seal and torque it to 25nm.

Nov 23, 2008 | 1996 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...