Question about Hyundai Terracan
I'm a car technician mechanic, last 2 days back i was attended a hyundai terracan vehicle it is not starting, after that i diagnose all the engine compartment then after i check with testing tool , i got the dtc came shaft position sensor malfunction after that i replaced the came shaft position sensor , after that the problem is not solve. pls tell me where is the problem
Okay diagnostics 101:
1) Do the spark plugs have spark?
2) Does the vehicle have air?, i.e. is the air-filter condition okay?3) Does the vehicle have fuel?, i/e/ is the fuel pump operational and is the filter clogged?
If the vehicle has all of these three things, then either the mixture of air and fuel is faulty, or the spark timing is faulty.
A common issue on a vehicle if it doesn't have an issue with the supply of all of those things is the MAF sensor or the Manifold pressure sensor, which can give false readings to the ECU and cause the ECU to provide an incorrect fuel injection, resulting in an incorrect fuel to air ratio.
Please let me know how your diagnostics works out.
Posted on Nov 04, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem with my '05 Stratus SXT 2.4 DOHC. I've replaced the cam pos sensor and it seems to be running fine right now. On the Dodge forums a lot of the guys say that you need to replace the crank pos sensor too. I've bought one of those just in case it comes back again. Hope this helps.
Posted on Jun 24, 2009
Here is what I could find on your P0340 error code:
CausesA code P0340 could mean one or more of the following has happened:
Posted on May 27, 2009
Hello. One way to check if it is working is when you try to start the car does the needle move on you tac? If not then your crank sensor is more then likely the problem. It is located on the backside of the engine under the intake manifold. If is in about the center of the block. There will be a 10mm bolt holding the sensor in. If you decide to change it yourself (not to terrible of a job) unplug the sensor, remove the bolt and spin it back and forth slightly while pulling it out. It may be stoburn and you might have to work at it for a little bit (not a done of room) but it will come. When it's out the sensor will be shaped kind of like an L. I have changed a few of these over time and they can be a little stoburn. To install just reverse the process.
Posted on Mar 26, 2009
SOURCE: DTC - PO340, PO325
My Nissan micro 2004 model just stopped in the middle of the road one day then the engine management light came on, anyway took it to my local garage TWK Thomas who said it was a cam shaft sensor problem. OK so sensor was put on, engine management light went off for two days only. So went back to the garage they said that another sensor should be fitted on the opposite side. And then the problem should be rectified, but i had given the £160 for this problem to be fixed the first time. I decided it was time to take it to another garage Nis Tec they put it on the computer and a code po340 came up would this mean another sensor or the cam chain has stretched please help. ...claire
Posted on Jul 22, 2009
Tips for a great answer:
Nov 26, 2014 | 2005 Hyundai Terracan 3.5
Aug 04, 2014 | 2005 Hyundai Terracan 2.9
May 20, 2014 | Hyundai Terracan Cars & Trucks
Aug 31, 2011 | 2002 Hyundai Accent
Aug 26, 2011 | Hyundai Santa Fe Cars & Trucks
Jul 02, 2011 | Hyundai Sonata Cars & Trucks
Jun 30, 2011 | 2006 Hyundai Sonata
Jun 28, 2011 | 2001 Hyundai Santa Fe
Jun 26, 2011 | Hyundai Santa Fe Cars & Trucks
Oct 23, 2017 | Hyundai Cars & Trucks
152 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: