Question about 1999 Chevrolet Camaro
My car runs fine its just the gas and rpm and speedometer gauge go up and then the rpm and speedometer go to 0 the rpm guage should atleast stay at 800 to 1000 at an idle. what is the problem is it my cluster
Need a new cluster. There may be a recall not sure but you can have cluster fixed by replaceing the step up motor in cluster.
Posted on Oct 31, 2012
Testimonial: "like this solution it got to the point"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like your missing a ground somewhere.
Posted on Apr 21, 2009
There has been issues with the solder joints on the PIN connection to the gauge cluster. The issue being that over time thru vibration and such one of these solder joints will fail (happened on or 1999) you can repair this though. You will have to remove all of the trim from around the driver's side dash board, this will include the trim towards the center of the dash. Once these pieces are remove you'll need to remove the gauge panel (I believe (4) allen head screws) carefully bring the panel and release the wire clip from it. Looking at the back of the panel, where the plug was, carefully with plenty of light look for one of the pins to have a failed solder joint. It will be very faint however the failed joint will be a fine dark line around the pin. To correct use a small soldering iron and reheat this solder until it wants to flow, let it cool and reassemble.
I hope this may have helped,
PS: I have helped several persons with this issue, please review my profile; good luck with it (also often times with this issue the ABS light stays on)
Posted on Oct 20, 2009
Testimonial: "thank you you are the only person who had an answer I will try and let you know"
have you got a dimmer switch on your model to dim the dash lights. if you have it may be faulty. link the cables together if the lights work the switch is faulty. if you have not got a dimmer switch
your printed circuit on the back of the dash may be faulty or the plug in the back of the dash is not pushed all the way in. hope this helps
Posted on Apr 16, 2009
Tips for a great answer:
Aug 25, 2010 | 2004 Isuzu Ascender
Feb 23, 2010 | 2004 Chevrolet Monte Carlo
Jul 29, 2009 | 1998 Nissan Frontier
Jul 17, 2009 | 1999 Dodge Ram
Jun 16, 2009 | 2003 Chevrolet Suburban 1500
Jun 01, 2009 | 1992 Dodge Caravan
Apr 21, 2009 | 2004 Chevrolet TrailBlazer
Nov 17, 2008 | 2004 Pontiac Sunfire
425 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: