Question about Cars & Trucks

Open Question

How to adjust idle on 1999 Mustang V8 4.6 GT - Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

savdragon
  • 37 Answers

SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?

You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett

Posted on Mar 19, 2009

  • 1 Answer

SOURCE: My 96 Mustang GT engine will idle fine in park or

Its your I.A.C ( idle air control)

Posted on May 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 3.8l v6 Ford Mustang secondary air intake engine warning light.


Check you Idle Air Adjust Valve and the air lines going to and from it.

May 06, 2015 | Ford Cars & Trucks

2 Answers

Mustang wiring diagrams


First check the light switch and brake switch. Under driver side is the rear light harness. Go to advance auto get a HAYES REPAIR MANUAL for mustang for that year I think they are all the same.

Jun 17, 2014 | 1999 Ford Mustang Cobra

1 Answer

How to set idle for 1984 mustang 3.8L, 6cyl


Technically the idle speed is not adjustable. The computer controls idle speed with the idle speed control motor.
Base idle is around 500 RPM with normal idle in park at 800.

Aug 17, 2012 | 1984 Ford Mustang

1 Answer

What's the steps to do an idle re-learn on a 2007


Hold the idle at 2000 RPM for 2 minutes then drop it to 1500 for 2 minutes and then 1000 for 2 minutes, then let it return to idle for 5 minutes. Full relearn requires some driving as well, mixed low and highway speed and idle time.

Feb 14, 2012 | 2007 Ford Mustang GT California Special...

1 Answer

Mustang GT 4.6 EVAP


96 gt 4.6 won't idle right and won't pull in gear and white smocks

Jan 18, 2012 | 2005 Ford Mustang GT

2 Answers

My 96 Mustang GT engine will idle fine in park or


it sounds like either the torque converter solenoid is stuck or the torque converter itself is bad

Sep 10, 2009 | 1996 Ford Mustang

2 Answers

High Idle/low speed miss


look for a diagram under the hood follow the route for each vacum . you have a intake leak take your time and go over each side of the engine even plastic air line could be cracked

Aug 17, 2009 | 1999 Ford Mustang Cobra

2 Answers

Mustang GT 4.6 EVAP Canister Purge Valve Location?


You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett

Mar 19, 2009 | 1999 Ford Mustang Cobra

1 Answer

Bought 5.0 engine with systemax installed. Said it ran great. I installed the engine and just put the a 255LPH fuel pump in. Adjusted fuel regulator to 42 PSI. Runs REAL ruff. Won't idle by itself. Black...


I think your 88 mustang contols the fuel air mix with a manifold absolute pressure sensor. Ive seen were the vacume line going into one has worked loose or broken cousing rough idle and throttle. llso check that the idle air control valve isn't plugged up with soot. This would also result in rough or loping idle but would be fine once the engine is hot. Let me know if this was helpful, good luck.

Mar 15, 2009 | 1988 Ford Mustang

1 Answer

1994 mustang gt cuts out


have you been tuning it? look for the vacuum hose you knocked off.

Mar 01, 2009 | 1994 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...