Question about Cars & Trucks

1 Answer

2004 Infiniti is leaking brake fluild where should I start looking?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

From the front middle or back of vehicle? at front I'd check the master cylinder first then try the rubber hoses near the calipers and the calipers themselves same thing on back if its in the middle that probably wouldnt be good because thatd be the lines that you really dont want to get into. It will prob be the rubber hoses or master cylinder is what I'd guess thats most often the case.

Posted on Oct 31, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 infiniti g35 coupe car wont start brake light gets dim then bright


Check the battery cables and battery to starter cables for corrosion and tightness .

May 10, 2016 | 2004 Infiniti G35 Sport Coupe

1 Answer

Im considering buying a used 1997 infiniti J30 with 180k. what parts/service is needed for this many mile tune up for this car


Check the air filter,Check the coolant.Check transmission fluid,Check power steering fluid.Check break fluid.Check oil and change if needed.Look for leaks,crawl under and see if their are any leaks.See what the belt look's like as the engine is running.Check the heater and a.c.Check the brake pads.

Sep 23, 2015 | Infiniti Cars & Trucks

1 Answer

Steering very hard


check power steering fluild could be low or out of fluild which also means that the power steering rack needs changing

Mar 03, 2014 | 2003 Infiniti G35

1 Answer

Brakes are out. Master looks ok. Can't find lines under engine to follow. no cheater book to ckeck with.


Master cyclinders never look OK. You have to fill em full of brake fluild ( all the way to the top) and pump the breaks lots and hard. recheck the fluild and if it went down look under the truck to see where it's coming out. If you can't find it look in the floor under the break pedal where the pedal rod goes though the floor. Fluild coming out here is a bad master cyclinder, if no leak is found put in still more fluild and pump till you find wher it's runnung out. if the fliuld stays full and the pedal goes all the way down the master is bad. Masters fail alot on older Isuzu trucks.

Jun 24, 2011 | 1994 Isuzu Trooper

1 Answer

I have a 2000 SL-1. Is there a mileage at which time I replace power steering fluid and/or brake fluid?


10 years is long enough but the service manual wants you to change the brake fluild everytime the brakes are worked on ( new front pads.) As the trama of the brake failing adds extra heat and the fliuild needs to be changed as it's damaged. the power steering fluild as well it should be changed every couple of yearsand mileage is'nt as important as time. If it smellsw bad or looks bad change it. One of my customers cars gets nosy and we change the fluild and it's fine but we end up having to do it every few months.

Nov 30, 2010 | 2000 Saturn SL

2 Answers

Brake bleeding procedure


make sure you have plenty of fluid in the resivoir. Turn the steering either right or left to access the bleeder valve. You will need a second to pump the break pedal at least three times and hold on the third. Break the bleeder loose. Only enough to blow air and/or fluid out. When it stops blowing (only lasts a second), tighten the valve up. Remember the second person CANNOT release pressure from the pedal until you tell them. Repeat this procedure until only fluid comes out with no air. Check the fluid level again and do same procedure for all four wheels. Use loud communication to tell your helper what to do. Example : "pump it up. Hold on three. Say when." then the helper will say "ok". You bleed and lock it back. Yell, "pump it up. Say when" this should resolve the issue. DO NOT LET THE RESIVOIR RUN DRY!

Oct 29, 2010 | 1988 Chevrolet Blazer

1 Answer

Car steering wheel shakes when i brake have had a slow leak with a tire for a month changed tire and still the tire goes flat


shaking could be a brake rotor problem, and the tire probably leaks at the rim or the valve stem

Oct 27, 2010 | 2004 Infiniti I35

2 Answers

Rear cylinder brakes leaking brake fluid


The cyclinder costs about 10 bucks at the partds store and if you change it before the fluild gets on the shoes your done of course the shoes being worn out are the readon most cyclinders leak. Shoes cost about 25 bucks and if you pay someone to do the work they should reconmend that whatever you do to one side you should do to the other side. turn or replace the drums repalace the springs ( 10 bucks) replace both wheel cylinders, Bleed the bakes all the way around till theirs new fluild in the whole system. If you not handy working on brakes have somone who is help you or hire the work done. The life you might save could be your own.

Sep 19, 2010 | Saturn SL Cars & Trucks

1 Answer

My check brake system light just came on...


hello you must have a bad brake cyinder on the rear look for fluild also behind your master cylinder could be leaking in power booster area remove two bolts and take a look ?

Feb 18, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

How do I change the bulb 2004 infiniti high mount bake light?


Unfortunately, these are not very simple. If you have a factory high mount brake light-meaning not one in a spoiler, you have to remove the rear seats, the rear parcel shelf and then the 3rd brake light. the 3rd brake light I believe is an LED setup which get replaced as an assembly which inserts into the housing. If you need further guidance let me know.

Thanks,

Brian

Dec 10, 2008 | 2005 Infiniti G35

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...