Question about Chevrolet Cars & Trucks

Open Question

What type of oil do you use in saginaw 605 gear box

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bmw_tech_38
  • 113 Answers

SOURCE: type of oil to use on an xtype manual gear box

hi, you should only use the correct oil for this type of gearbox, available from the jaguar dealer, for the price of posibly damaging the gearbox with the wrong oil you may as well pay a little more from the dealer. regards mark.

Posted on Feb 15, 2009

Ad
  • 6982 Answers

SOURCE: have saginaw manual steering gear box on 70

There should be two adjustments on your steering box. Loosen the large ring nut at the end of the box and tighten the center adjuster to zero clearance. When re-tightening large ring nut, make sure that adjuster does not turn with it (sometimes it helps to adjust a bit looser so the adjuster ends up where you want it) You will also find another adjustment on the cover opposite the pitman arm shaft. Adjust with wheels off the ground and make sure that after adjustment is made box does not bind. If any binding is noted, back off a bit.

Posted on Jun 08, 2009

  • 432 Answers

SOURCE: what type of oil for Mitsubishi Colt gear box

First drain completely out whatever is in it. All the gear boxes and rear ends use 90w gear oil. Buy a name brand.Some of the really cheap stuff is recycled used oil.
I hope this helps you.

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my range rover classic tdi 5 speed manual the gearbox getting very hot ?


check the oil level and the type of oil in the gear box. If too much oil -that will make it hot. If too little oil -that will make it hot. IF the oil is not right viscosity -that will make it hot. get a infrared thermometer and read the gear box temperature to get an idea of the oil temperature as what feels hot on the stick may be operating temperature of the oil

Dec 25, 2013 | 1988 Land Rover Range Rover

1 Answer

My 2000 jaguar gears slips


please people, lets be very careful when issues of the gear box comes up.
1. make sure you have your gear box serviced regularly
2. make sure you get the recommended oil
3. go to a qualified gear box specialist.
your gear box needs to be serviced.

Mar 05, 2013 | 2000 Jaguar S-Type

1 Answer

Where can I find the inlet to poor gear box oil in to?


Depends on the make year and model, Engine size and transmission type and if it's 4wheel drive or not. Gear oil can possiblt go in the front rear end the rear rear end, The transfer case, The manual transmission. Some units don't use gear oil. Some manual steering gear boxes use gear oil too. Most all gears boxes don't have a way to pour the oil in as they have level plugs in the side at the normal fluid level. These plugs are located on the sides and they frequently can be turned with a 3/8 in drive ratchet extension. If the oil comes out or is just inside the hole with the vehical parked leavel then it's full. Yes they also have drain plugs and they frequently have the same kind and size of plug on the bottom as on the side.

Mar 21, 2011 | Ford Focus Cars & Trucks

1 Answer

I have a saginaw 4 speed that i would like to put in a 73 camaro. The motor is a 350 with about 360 hp. the car has 410 gears.I have heard this transmission is not very strong is this true? if this is true...


I had a Saginaw 4 Speed in a 1970 Chevelle with a 396 bored out to 409 and a cam. I took a couple of stock clutches out of it but never hurt the tranny. I used it for a daily driver and some "street fun" for about a year and a half until I spun a bearing,but that's another story ( read Stupid). Hope this helps.

Oct 17, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

A jolt from the rear of the car when the auto gear box changes in low gear and a noise from the near side rear


jolt from the rear of the car when the auto gear box changes in low gear is a common fault in the older s types. most of the time is a sign of the gear box on its way out. is worth checking gear box oil level and oil quality though. noise from near side rear would probably be the damper rose joint which make a knocking noise when they wear.

Apr 21, 2010 | 2000 Jaguar S-Type

2 Answers

Power steering box that will interchange with 1965 Rambler V-8


ramblers were a mixture of the" big three" back in the '60s you might see if a steering box from a dodge ram series pickups or ford f series pickups may fit. also,check closely on the steering box for a casting number,parts suppliers use these numbers as a cross reference to match other steering boxes to your application.

Jan 20, 2010 | AMC Cherokee Cars & Trucks

1 Answer

What type of oil for Mitsubishi Colt gear box


First drain completely out whatever is in it. All the gear boxes and rear ends use 90w gear oil. Buy a name brand.Some of the really cheap stuff is recycled used oil.
I hope this helps you.

Sep 11, 2009 | Mitsubishi Colt Cars & Trucks

1 Answer

Have saginaw manual steering gear box on 70 pontiac t/a. steering seems a little loose. how do i adjust saginaw box


There should be two adjustments on your steering box. Loosen the large ring nut at the end of the box and tighten the center adjuster to zero clearance. When re-tightening large ring nut, make sure that adjuster does not turn with it (sometimes it helps to adjust a bit looser so the adjuster ends up where you want it) You will also find another adjustment on the cover opposite the pitman arm shaft. Adjust with wheels off the ground and make sure that after adjustment is made box does not bind. If any binding is noted, back off a bit.

Jun 08, 2009 | 1979 Pontiac Firebird

2 Answers

Type of oil to use on an xtype manual gear box


hi, you should only use the correct oil for this type of gearbox, available from the jaguar dealer, for the price of posibly damaging the gearbox with the wrong oil you may as well pay a little more from the dealer. regards mark.

Feb 11, 2009 | 2003 Jaguar X-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...