Question about BMW 525
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it is a sealed trans. you will have to bring it to BMW to have them take a look.... they dont put a dip stick on that car and many other's so you can't do anything except bring it to them to have it worked on... sorry for the bad news.... hope this helps you
Posted on Jun 14, 2009
On the driver side of the transmission pan there is a fill plug. The car must be in the air and level. With the car running fluid will run out of the plug hole when it is full. This is no fun without a lift.
Posted on Sep 01, 2009
I own a 1994 BMW 540i with an automatic transmission. The filler hole/plug is located under the transmission oil pan. Picture in your mind an inverted cone with a hex plug inside the top of the cone. You will need to remove the plug and pump fluid into the pan until it overflows. Also, this must be done with the engine running and the transmission in neutral.
Do not try this unless to you have the proper equipment to raise your car, keep it level, and have four jackstands in addition to the special fluid and pump.
Posted on Oct 15, 2009
there is no tranmission dip stick, this is a sealed transmission, the dealer has a special tool that goes into an access plug in transmission case under the car,
Posted on May 10, 2010
Tips for a great answer:
Nov 01, 2014 | 2005 BMW 545i
Oct 08, 2012 | 2005 BMW 525i Automatic
Mar 28, 2012 | 1994 Dodge Caravan
Aug 14, 2011 | 1994 BMW 7 Series
Jan 13, 2011 | 1992 BMW 5 Series
Aug 31, 2009 | 1984 BMW 5 Series
Apr 22, 2009 | BMW 525 Cars & Trucks
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: