Question about 2004 Nissan Maxima

1 Answer

It simple my lug nuts broken off. what do you called the replacement tire studs ? i need four lugs nuts and the pieces you screw them to

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Studs, but you need to replace the hubs.

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 91 Honda Accord EX wagon has a broken lug on front driver side. How do i fix it, & will it be ok in the meantime with the three lug nuts on tight?


It is not recommended to drive it like that. It's not too bad to replace but it depends on your level of mechanical skill, You need to remove the brake caliper and disc and then you can simply knock the remains of the broken stud out with a hammer and punch, To fit the new one insert the stud and then put a large nut over the thread, then fit the lug nut and tighten it to pull the stud into the hub, then simply remove the lug nut and put it all back together.

Jan 18, 2012 | Honda Accord Cars & Trucks

2 Answers

I have a 1997 isuzu rodeo. 2wd. the front left wheel hub has sheered off 3 of the lugs. do I need to replace the entire wheel hub or can the lugs be replaced? If so how.


Depends if the studs are pressed in or an as built unit. Have a look at what the stud looks like and if it appears to have little grooves in the back side, you can hammer out the other 2 and then replace. I would also look into why the studs are having that much force that they are being sheered off.

Mar 14, 2011 | 1996 Isuzu Rodeo

1 Answer

I had a flat tire and someone put the wrong size tire on my car which caused the srews for the lug nuts to break off now i cant put my tire on is the car a total now


No...absolutely not. However....it is more likely that the lugs were not tightened in the first place that caused the lugs to break. Wrong size tire will not do that. Furthermore...its a pretty simple fix. Jack up the wheel....pull off the caliper bracket and rotor will slide right off. Then you have a hub in front of you with all of the broken studs facing you. Take a hammer...smack out the studs from the hub. They are splined in there....one good hit can smack them out. Call your local NAPA or Auto Zone...give them your vehicle info and tell them you need all of the lug studs and lug nuts for on side of the vehicle. They should have them in stock. The rest is just reversing your removal procedure. Turn the wheel out...smack them in till the flat base of the stud is flush with the back of the hub. put rotor and caliper back on....and then the tire....tighten the lug nuts! You are good to go. Probably a $20 repair. Caliper bolts may be very tight....they use lock tight in the factory. You should get ahold of a good 1/2" breaker bar

Nov 14, 2010 | Ford Explorer Cars & Trucks

1 Answer

I need to know what are the bolts are called that the lug nuts go on a vehicle? I thought that it was the rotor. Mine has stripped.


You require "lug studs" to be able to install a lug nut to secure the tire.

You will need a special tool to press the lug studs in and out of the flange, or you can follow these directions;

First you will have to pound the broken lug stud(s) out of the wheel hub, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down backwards with the flat end of the lug nut towards the flat washers to take up the slack and use plenty of grease on the threads.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Let me know if you require any further assistance.

Jul 30, 2010 | 1999 Mazda Millenia

2 Answers

Broken lug nut how to replace lug nut studs


take off tire. remove old stud by hammering it out with a punch. put a socket behind axle plate so as not to break the plate. when replacing, just start stud from back by hand, then use a lug nut to pull it in tight. when tight replace tire!

Apr 14, 2010 | 1999 Oldsmobile Intrigue

2 Answers

2000 Dodge Caravan....broken wheel studs...


Yeah , it's a fairly simple repair, All the wheel studs must be replaced and lug nuts also.Closely examine the wheel or get competent tyre replacement company to double check for damage ! Remove the brake disc caliper and brake disc itself (usually 2 cross head screws) , tap off (gently) it may be stuck thru corrosion / rust etc , Broken studs can be knocked out(towards drive shaft ) of the hub assy with a suitable drift and hammer (splined into hub) . The studs are a servicable replacement part. Check all other wheel nuts as this is usually a result from poor fixing or wheel replacement recently .. Good luck

Apr 05, 2010 | 2000 Dodge Caravan

3 Answers

How to replace lug nut studs 2002 chevrolet cavalier


take a hammer and a punch and pound it in, it will pop out the back of the hub assembly, then you get your new bolt, slide it through the back, same way the old one came out, throw a few washers on it and use the lug nut to draw it out till it catches, take the lug nut and washers back off, put the tire back on and use a little extra torque on that stud to insure it is all the way in place.

Good Luck!!

Mar 21, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

My front driver side in the middle of my rim the bolt has snapped off an i need to know what its called an how to fix it


lug stud or lug bolt. you need to get the rotor off and lay it flat bolts up on a piece of wood tthen hit the broken one with a hammer should pop out back then push the new one in from the back when you put the tire back on the lug nut with set it in place

Oct 24, 2009 | 1996 Plymouth Breeze

2 Answers

Two left side front wheel studs nuts broken.


They are replaceable.
You can knock the broken studs out with a point chisel (wear safety glasses). Take the pieces and nut to an auto parts store in order to get the same nut size (don't want to use two tire tools/wrenches).

Sep 25, 2009 | 1996 Nissan Quest

1 Answer

Broken lug nut stud on 98 civic dx coupe


knock it out... use an old nut that will fit the new stud and install the stud. the nut will pull the stud in tight to the flange.

Jul 19, 2009 | 1998 Honda Civic

Not finding what you are looking for?
2004 Nissan Maxima Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...