Question about Ford F-150

2 Answers

Broken Sparkplug Ford -150 5.4.How do I remove shank?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 233 Answers

It will be very difficult to get to from the top,You MAY be able to use an extractor, but if anything happens like stripped threads for the spark plug or pieces of old spark plug falling down into the cylinder you can ruin the head --- Unfortunately, every time I have encountered this problem, I have had to remove the head and get to the plug from the bottom.

Posted on Jan 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

You have to use a spark plug wrench to get the rest of the spark plug out.

Posted on Jan 03, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


It will be noisy and if you remove the plug lead there should not be a problem. The piston goes down and sucks in unfiltered air and comes back up and blows it back out . Drive it at a slow to moderate speed and it should be alright.

Apr 06, 2014 | 2004 Ford F-150 Heritage

1 Answer

Code p0316

Code 316 is an extension of your Code 304. 316 means its misfiring in the first 1000 RPM's and 304 means number 4 cylinder is the problem cylinder.
Could be a bad wire, coil, or sparkplug.

Jul 08, 2013 | 2009 Ford F-150

2 Answers

What is the best type of spark plugs for my 2000 Ford F-150 XLT V6 4.2L engine

Hi, NGK platium are the best that I have come across. Many of the new cars now have these. They will work for you as well.

Mar 15, 2012 | Ford F-150 Cars & Trucks

1 Answer

We are trying to replace the ignition coil on my 1997 Ford Econoline E 150 V8 van. We have looked through the manual, but are still unable to figure out exactly where there are. None of the pictures give...

follow the sparkplug wires..One end goes to the plugs..The other end goes to the coil...If you dont have sparkplug wires then you have coil-over coils..Thats where the coil sits right over the spark plug...

Sep 10, 2011 | 1997 Ford Econoline

1 Answer

How do I get the spark plugs out of my 1998 ford escort to replace with new ones? Also where does the pcp Valve go?

With you hood open and you are standing in front of the car sparkplug wires need to be removed,i suggest you remove them one at a time, under each wire the sparkplug is threaded into the cylinder head,using a 5/8 sparkplug socket remove the sparkplug and replace it with new properly gapped sparkplug.Note:if you remove all sparkplug wires at once the factory wires are generally numbered 1 2 3 4 the sparkplug closesed to the passenger fender is #1 and the one clossesed to the driver's fender is #4.Standing in front of vehicle the PCV Valve is located between #3 and #4 on the backside(intake side) of the engine fitted down into a rubber hose

Jul 17, 2010 | 1998 Ford Escort

2 Answers

What is the spark plug torque on 2005 ford f-150 5.4

I believe its 13 lbs but be careful changing the plugs after removeing the coil pack use a air nozzle to blow out the hole. turn the sparkplug 1/4 turn put about one ounce of carb cleaner into each hole wait 30 min. then carefully remove the plug (if when you remove the plug it does not look like the new one you will have to get a plug removal tool to remove it)before you install the new plug blow the hole out again then coat the lower portion of the plug then reinstall. good luck

Apr 08, 2010 | 2005 Ford F-150

3 Answers

Firing order

firing order is scribed on the intake of all ford engines
also silinders are numbered on the intake also

Jul 31, 2009 | 1996 Ford F150 Regular Cab

1 Answer

What is the sparkplug gap for auto lite platniu, ap5125 on a ford 150 1993 4.9 liter v6?

The gap is .044, decimel zero four four. Does NOT matter if a plug is copper, platinum, etc... the gap is the same.

Dec 06, 2008 | 1993 Ford F150 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

74544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers


Level 3 Expert

5433 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides