Question about Chrysler Cars & Trucks

Open Question

How to change the marker light on a Smartcar?

2008 Front driver side marker light needs replacing.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10865 Answers

SOURCE: Need to change the front side marker bulbs

Do not attempt to remove the housing. Attack from the underside. Turn the wheel so that it points out. Pull back the thin black covering in the wheelwell part way. This is done by starting at the front of the car and part way up the wheelwell. You will need to remove two screws and one black snap button. (If the button breaks, you can get them at the dealership for pennies.) You should now have access to the bulb socket. Entire process should take approximately 10 minutes.

please rate my answer as a fixya!

Posted on Feb 16, 2009

Ad
betz73
  • 298 Answers

SOURCE: front side marker

Under the hood on the backside of the light lens there is a ring with a wire in it. You must unscrew the ring and replace the bulb there. Now it will be a little difficult to get your hand in there but this is the only way to replace the bulb.

Posted on Oct 29, 2008

  • 5 Answers

SOURCE: headlight bulb replacement & side marker light bulb replacement

i think there are two flat guide pins that hold the headlight assembly in .. just pull them straight up ..and the assembly should come out ..hencse replace the bulbs.

Posted on Jan 25, 2009

  • 9 Answers

SOURCE: replace parking/marker bulb front pass 98 Jeep Grand Cherokee

look in between the marker and headlights its a screw there screw it out

Posted on Apr 05, 2009

  • 19 Answers

SOURCE: how to change front driver side 2004 g35 coupe marker light

Just pop out the side marker from where the marker meets the fender well and push outward on the side marker. It has a metal clip retaining it to the bumper.

This entry was in January, most likely you figured it out already.

Posted on Jul 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why would only one out of 4 marker lights work?


you are right all marker lights come off of one fuse, inside instrument panel, number 29, a 10 amp fuse my manual does not give a lamp number, it has a chart, head lamps (high) lamp 9005 60 w type a, headlamp (low) 9006 51 w type b, front marker lamps 5w type d, for the rear it says to use a lamp 7443 21.5 w type d, I do not use these, I have special lights on mine, hope that it helps

Mar 28, 2015 | 2007 Scion tC

2 Answers

I have a 2003 GMC Envoy XL and the driver's side front parking and marker lights don't work although the signal light does. Both of the marker lights were blown and one of the prones in the parking lamp...


If you have a test light, you can check for power at the light sockets and connectors. If you have power, you can connect the alligator clip on the test light to the positive side of the battery and test for a faulty ground...Good luck!

Mar 14, 2011 | GMC Envoy XL Cars & Trucks

1 Answer

How do I change the front side marker light bulbs?


Bi-Xenons - 6000K D1S
High Beams - Osram Nightbreakers H7
Fogs - PIAA H11 Yellow Ion
Cornering Lights - Osram Nightbreakers H3
Front Park Lights - High-Powered LEDs with built-in resistors
Front Signal Lights - Sylvania Silverstar 7507A ST (Silver Bluish but lights up Amber)
Front Sidemarkers - InviSilver W5W (Silver but lights up Amber)
Rear Signal Lights - P21W Stealth Bulbs (Silver but lights up Amber)
Reverse Lights - Sylvania Silverstar 7506ST or Error-Free LEDs
License Plate Lights - C5W Error-Free High-Powered LEDs
  • Turn the engine off and approach the side of the porsch with the burn-out side-marker light. If you are replacing both, start at either side; the replacement procedure is the same.
  • 2 Remove the screws from the plastic fender liner. Peel back the liner to access the area behind the fender.
  • 3 Reach your hand inside to gain access to the side-marker light's backing. Push the backing forward to release the side-marker lens; it's held in place by small clips.
  • 4 Grab the lens on the outer side and turn it over to access the back. Gently turn the bulb to release it from the plastic lens.
  • 5 Pull the bulb straight out to remove it from the electrical socket. Insert a new bulb, but do not touch the glass part of the bulb with your hand.
  • 6 Push the new bulb into the side-marker lens. Turn it clockwise to install it. Push the side-marker lens back into place. Apply gentle pressure to the lens to pop it back into its mount.
  • 7 Replace the screws along the edge of the fender liner.


  • Dec 04, 2010 | 2006 Porsche Cayenne

    1 Answer

    Raplacing a drivers side front marker light.


    To replace the sidemarker light on a 96 Towncar, raise the hood and open the black plastic flap behind the header panel on that side. There is a 11mm nut down about 5" on the side. Remove it. The screw is on the outside just past the plastic lens. Pull the light out far enough to unscrew the bulb socket.

    Oct 05, 2009 | 1996 Lincoln Town Car

    1 Answer

    Front marker lights fuse


    Try looking under the drivers side passenger seat.

    Jul 28, 2009 | 2003 Chevrolet Suburban 1500

    3 Answers

    Replace parking/marker bulb front pass 98 Jeep Grand Cherokee


    look in between the marker and headlights its a screw there screw it out

    Apr 04, 2009 | 1998 Jeep Grand Cherokee

    1 Answer

    How to change front driver side 2004 g35 coupe marker light


    Just pop out the side marker from where the marker meets the fender well and push outward on the side marker. It has a metal clip retaining it to the bumper.

    This entry was in January, most likely you figured it out already.

    Jan 19, 2009 | 2004 Infiniti G35 Sport Coupe

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    392 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    77169 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22258 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8722 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...