Question about 1998 Ford Ranger

Open Question

Engine revs high when changing gears

Engine idles high and revs up when changing gears

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 208 Answers

SOURCE: 2006 Ford Focus 1.6

Check throttle position sensor.

Posted on Aug 01, 2008

  • 182 Answers

SOURCE: idle

the throttle position sensor may be bad or you may have a vacuum leak

Posted on Oct 15, 2008

  • 43 Answers

SOURCE: Truck idles rough but at

Give it a complete tune-up, New spark plug and wire.new Ignition coil. Depending on the engine either replace ,Cap and rotors or coil packs.Also might want to get the fuel injectors service

Posted on Nov 17, 2008

chrischronic
  • 235 Answers

SOURCE: ENGINE SURGES AT IDLE

with the engine running lift hood and lisen for a vacum leak and check all your vacum lines. if no vacum leak can be found then replace the idle air control valve.

Posted on Apr 21, 2009

alicantecoli
  • 22095 Answers

SOURCE: focus 1.4 zetec idle tickover is about 2000rpm

sensor problem,without the right equipment it will be cheaper to put it in the dealers

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Revs high when i change gear


Is it possible the clutch pedal is interfering with the throttle? Start the engine in neutral and allow it to idle. Press only the clutch pedal down and see if this increase the engine speed. If it does speed up the engine and slows back down when you release the clutch then somehow this operation is where your fault lies. If it doesn't alter the idle speed, then rev your engine and release the throttle to see if it returns to idle immediately. If it is slow to return to idle then your throttle cable could be sticking. This means when you change gear lifting off the throttle has little effect and depressing the clutch to change gear causes the engine to race as the throttle is still partially open.

Aug 23, 2014 | 2005 Ford Fiesta 1.3

1 Answer

Is it normal for the revs to stay up when changing gear in a 2002 4x4 3.0L turbo diesel navara?


do they revs drop off when taking pressure off accelerator pedal when out of gear? if only staying high during gear change it would suggest a worn clutch friction/pressure plate so the engine isn't slowing down when clutch is depressed .I'd also have the OBD codes read to see if there is a sensor/switch at fault , but sounds like the clutch to me

Jun 21, 2014 | Nissan Navara Cars & Trucks

1 Answer

Idles high from first to second gear .


Define idles high like its going high rpms before shifting or the engine itself is high reving if its high rpming when shifting its mostly you tranny going out you can try tranny fix oil I used it on my truck when it had shifting problems and ive had no problems since it takes a few days to work though and if its the motor itself it could be a lot of things but I dont know much of the problem based on what you told us

Mar 10, 2014 | 2004 Hyundai Elantra

1 Answer

Engine revs is too high when in neutral gear


First thing check for engine control module fault codes, if you have a lean running code then you have a vacuum leak on the engine, this allows air to bypass the idle speed control system and raises the idle up. Another issue is a sticking Idle speed control air bypass valve, but that is not common and vacuum leaks are.

Apr 04, 2017 | 1994 Honda Accord

1 Answer

What's causing my Tahoe to rev high in neutral and slam into gear?


Is the check engine light on ? It could be a vac leak or a problem with the idle air control valve.

Jul 03, 2013 | 1989 Chevrolet Suburban

1 Answer

Replaced throddle idle motor. cold or hot, engine high revs at idle, and between gears while driving.


high revs are usually caused by a vacuum leak, pinch each line one at a time,

Nov 26, 2010 | GMC Sonoma Cars & Trucks

1 Answer

Grinding sound on pressing clutch in at high revs


The grinding sound may be a throw out bearing or the pilot bearing. The sticking throttle problem sounds like a linkage or cable binding up from possibly damage due to the impact from the accident.

Feb 05, 2009 | 2008 Toyota Yaris Sedan

1 Answer

Car revs too high


you can ajust the engine rpm idle from the idle screw and air flow screw on the intek housing

Dec 21, 2008 | 2003 Toyota Corolla

1 Answer

Hyundai accent high revving during gear change


you may have a problem with the idle sensor located near the fuel injection system.

Oct 29, 2008 | 2000 Hyundai Accent

1 Answer

Rev high when changing gear up


my friend has same model its normal he said it does it more so when its cold

May 24, 2008 | 2003 Honda CR-V

Not finding what you are looking for?
1998 Ford Ranger Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...