Question about Hummer Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hummer h2
light green most likely, the easiest way to find out is pop out one of your taillights quick and have somebody sit in the vehicle with the key on and put it in reverse then probe the wires coming off your reverse bulb socket with a test lamp until you find power, this way you know which wire for sure. Thanks for using fixya!!
Posted on Mar 15, 2009
A test light checking each connector would be faster and easier to do. Maybe somebody may have a illustration for you but by far a simple test light is all you need with a helper turning on the different lights as you check them out and writing all your findings down
Posted on Jan 22, 2010
I can't get my brake lights to work. the rear one in the window works but the tail ones won't work.do you have any ideas as of what to try to fix this problem. Thanks!
Posted on Jul 03, 2010
Tips for a great answer:
Apr 01, 2014 | 2005 Hummer H2
Nov 28, 2012 | 2008 Hummer H3
May 16, 2011 | Hummer H3 Cars & Trucks
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Jan 22, 2010 | 1997 Ford F350 Crew Cab
Nov 03, 2009 | 2005 Hummer H2
Apr 15, 2009 | 2008 Hummer H3
Feb 28, 2009 | 2006 Hummer H2
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: