Question about Cars & Trucks

Open Question

Fault code on merc sprinter reads brake gasket wear sensor code 909F

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
BeamerGuy
  • 28 Answers

SOURCE: fitted new brake pads to

When you replace the brakes on a Car like this you should also replace the sensor otherwise the Worn Brake warning light is not going to switch off.

Posted on Oct 13, 2008

Ad
  • 51 Answers

SOURCE: sprinter gear selector

This is the gear linkages. It is a cable operated system to allow the gear lever to be dash mounted.

They are a common fault. The parts are about £65 from Mercedes (dealer only part) and unless you know what you are doing you can expect about 2 - 3 hours labour charge, though there are no special tools involved.

They average about 60,000 miles, though the replacements tend to be better.

Posted on Mar 28, 2009

jbass706
  • 167 Answers

SOURCE: P242F Bank1Sensor3 sprinter fault codes 07 Sprinter 2500

Bank one is the side on a V or H engine where cylinder number one is located. On an in-line engine you only have a bank one, no bank 2. Sensor 3 will be the third sensor from the engine in the exhaust stream.

Posted on Oct 25, 2009

Testimonial: "That was extremely fast answer :)"

Onifade
  • 268 Answers

SOURCE: does a ecu from a merc sprinter or ml fit a grand

From 1992-2002 cherokee shares the same ecu.

Feel safe fitting it.

Rate this, please.

Posted on Dec 15, 2009

roniecon
  • 6826 Answers

SOURCE: 1999 merc sable no fire I changed crank pos.

Change the cam sensor

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Sable ECU bad???


I suggest scanned the ABS module in order to know fault codes stored there. Just with this code number could send you solution details. Could be a probem with the sheel speed sensor misadjust, but will need confitm with the codes finded.

Jul 16, 2012 | 2001 Mercury Sable

2 Answers

Fault code p1955


I used a generic scan tool on a v6 sprinter and it gave me fault code p1955 as a current code. I hooked up the factory scan tool (star diagnosis) and had no fault codes. Looked up the mercedes benz obd codes and this code does not exist. What symptoms do you have with your sprinter?

Aug 11, 2011 | 2010 Mercedes-Benz Sprinter

1 Answer

2006 dodge sprinter came from oil change and engine light is on and cruise control not working. checked oil and is at correct level


Stop by Auto Zone or another parts store that will read the fault codes for free and get the fault code. That will tell you where to look. Most likely it's the O2 Sensor being faulty. It is about the right time to change that.

May 20, 2011 | Dodge Sprinter Cars & Trucks

1 Answer

Stabilitrac shuts off and comes up with the code saying service break system? What could be causing this?


stabilitrac requires the brakes to operate. Your brake system likely set the fault code. Possibly faulty brakes could make the activation of stabilitrac anything but stabilizing. Check your fluid level, pad wear and condition of wheel speed sensors, wires and connectors. To be sure what the fault is have the code read at your local pep boys.

Nov 30, 2010 | 2007 Chevrolet Silverado 1500 2WD

2 Answers

Where is the brake light switch location


removing 2006 dodge sprinter brake switch

Oct 22, 2010 | 2006 Dodge Sprinter

3 Answers

THE PANEL SHOW A CIRCLE WITH A CUTTING RING OUTSIDE


This warnign light means BRAKE WEAR (visit workshop)
Cause:
(Warning) The brake pads / lining have reached their wear limit.

Possible Solution:
Have the brake pasd - linings replaced as soon as possible at an autorized Sprinter Dealer.

I hope helped with this. Good luck.

Dec 04, 2009 | Dodge Sprinter

1 Answer

P242F Bank1Sensor3 sprinter fault codes 07 Sprinter 2500


Bank one is the side on a V or H engine where cylinder number one is located. On an in-line engine you only have a bank one, no bank 2. Sensor 3 will be the third sensor from the engine in the exhaust stream.

Oct 25, 2009 | Dodge Sprinter

1 Answer

2001 merc coupe keeps displaying BRAKE LINING WEAR! Got it checked but keeps popping up.How can i reset it or clear it?


this usually comes up when one of the brake pad sensor wires grounds out against the brake rotor due to the pads being low.

Aug 31, 2009 | 2001 Mercedes-Benz C-Class

3 Answers

2006 dodge sprinter esp light on and tire spin light


Go to nearest garage and do diagnosis test and fault erase.

Mar 04, 2009 | 2006 Dodge Sprinter

1 Answer

Fitted new brake pads to merc c220cdi,52 reg, dont know how to reset pad lining wear indicator


When you replace the brakes on a Car like this you should also replace the sensor otherwise the Worn Brake warning light is not going to switch off.

Oct 13, 2008 | Mercedes-Benz 190-Class Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...