Question about Chevrolet Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs
Posted on Sep 10, 2009
Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"
Typically, Chevy rear ends either have a bearing bolt plate or else it is a "c" lock axel. With the c lock style, you have to pull teh center inpsection cover off, and remove the pin that holds the IDLEing spyder gears.
The spyder gears are inside the carrier assembly. once the idler shaft is removed, you press the axle IN, towards the center of the vehicle, and then look in the area where the idler shaft was removed. You will see the C clip and the notch in the end of the axle.
Posted on Mar 11, 2010
Tips for a great answer:
May 12, 2017 | 2001 Chevrolet Silverado 1500
May 08, 2017 | Cars & Trucks
Dec 03, 2011 | 2003 Chevrolet Silverado 1500
Jan 24, 2010 | 1999 Chevrolet Silverado 1500
Sep 10, 2009 | 1999 Chevrolet Silverado 1500
Apr 24, 2009 | 2003 Chevrolet Silverado 1500
133 people viewed this question
Usually answered in minutes!