Question about Buick Cars & Trucks

1 Answer

Ok changed the plugs and wires and still jerks when it is driven for awhile whats up

Posted by on

  • 1 more comment 
  • Barbara Musta Nov 03, 2012

    car is a 2000 buick le sabre and still jerks even though i have changed the plugs and wires

  • teds repairs
    teds repairs Nov 04, 2012

    here is my link you can e mail me there

  • Ian McKinnon Nov 08, 2012

    Fuel filter.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,101 Answers

Hi Barbara what kind of car do you have and the year please thank you

Posted on Oct 31, 2012

  • 3 more comments 
  • teds repairs
    teds repairs Nov 03, 2012

    ok are there any codes coming up. does it stall? is the jerking happen when you are taking off from a start after a stop. I am aself employed mechanic. this my facebook pageto my garage. I have a lot questions on this

  • Barbara Musta Nov 03, 2012

    when i take off also when im driving without pushing the gas pedal i can feel a little **** could it be the fuel filter dirty gas

  • teds repairs
    teds repairs Nov 03, 2012

    it almost sounds like a transmission problem. I am trying to get a mental picture in my head

  • Barbara Musta Nov 04, 2012

    i kind of thought that but im no mechanic

  • teds repairs
    teds repairs Nov 05, 2012

    you are in the united states and in what state. I would like to help. go to my facebook page and like it when leave me email please thank you ted


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hello, I'm having problems with my 1993 Toyota

Are you sure that's not the AC compressor engaging?

Aug 28, 2013 | 1993 Toyota Camry

1 Answer

Jerking / hesitation

your problem must be your connection of the wire try to fix them all.

Oct 30, 2012 | Cars & Trucks

1 Answer

When my car is going for awhile and i stop and start it jerks and today died on me have never changed the plugs could that be the trouble

sounds to me like a coil pack could be it try removing one by one the wires and seeing if they spark and if your vehicle runs any rougher when you pull one off and no change happens that will be the defective one

Oct 24, 2012 | 2000 Buick LeSabre

1 Answer

Why does my truck jerks when shifting

Sounds like you should take a look at the spark plug wires, cap, or rotor.

Feb 14, 2012 | 1992 Nissan Pickup

2 Answers

I have an 04 hyundai elantra and it jerks when i drive, i took it to the shop and no codes came up and no check engine light came up. My car needs a fuel pump could this be why the car jerking? And when...

I would check the transmission fluid. It may need changed and the filter changed. Perhaps you are not getting a good spark from your spark plugs or coils. Has it been awhile since you had a tune up?

Mar 03, 2011 | 2004 Hyundai Elantra

1 Answer

I have a 1992 toyota camry that is hesitating and trying to stall

yes basically there usually held on with a couple of bolts

Apr 29, 2010 | 1992 Toyota Camry V6

1 Answer

Hesitates and jerks

get a wiring diagram for the spark plug wires make sure there on right.. thats where i would start anyway..if there right check the plastic cover the plugs plug in to for a hairline crack.. if ok change plugs and wires.. and it should be fine

Mar 20, 2010 | Ford Explorer Cars & Trucks

1 Answer

Code 304 on my Santefee 4cly what could it be has 91 thous miles never change plugs or wires its a 2004

P0304? Cyl #4 has a misfire concern. This could be from a spark plug, ign wire, failing injector, wiring issue. If it hasn't had a tune-up, this would be a good place to start. If the vehicle is driven for awhile, it will cause the cat converter to fail. This condition should be addressed ASAP, so other damages don't happen. Craig

Jan 19, 2010 | 2004 Hyundai Santa Fe

2 Answers

1988 ford laser jerking badly when being driven

This sounds like your transmission is slipping. When it slips you will lose power when it catches back that's when you get the ****. Hope this helps.

Jul 24, 2009 | 2001 Ford Focus

1 Answer

I get a **** everytime I start the engine then pull off?

Sounds like you have a bad coil pack or bad plug wires. Test your wires and coil packs.

Jan 09, 2009 | 1995 Buick Riviera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides