Question about Cars & Trucks
Down on the steering tube near the firewall, on top of the tube. To make access easier, drop the column by removing the 4 bolts that collapse aboutment to the dash frame, then you can see the actual electrical portion of the switch. It is retained by 2 break off screws that you need to cut a slot into to engage a screw driver for removal. There is also a small pin that is supposed to hold the harness to the switch itself. If it was made in the Kansas City plant, it may not be present. If you are replacing the switch, make sure the date is 93 or newer. Do not reuse an older model switch as it was among the numbers involved in the recall back in the 1990's..
Posted on Oct 31, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 31, 2012 | Ford Cars & Trucks
Jan 14, 2012 | 1990 Ford F250
Dec 28, 2010 | 1990 Ford F250
Oct 01, 2009 | 1990 Ford F250
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: