Question about Chevrolet Cars & Trucks

1 Answer

Cannot program my remote for 2000 chevy malibu

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If its aftermarket there is a switch to reset the alarm .. try flipping the switch up and down n try again....check under the drivers dash

Posted on Oct 31, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 206 Answers

SOURCE: program a keyless enrty remote start 2004 chevy malibu

Dealer only If you find a different means let me know

Posted on Apr 08, 2009

bohardin
  • 13 Answers

SOURCE: How can I program a keyless remote for my 2007

that will have to be done by a chevy dealer

Posted on Jul 04, 2009

blueextc3221
  • 15935 Answers

SOURCE: 2000chevy malibu keyless entry problem need help

1. Close the vehicle doors.

2. Turn ignition to the ON position then OFF.

3. Remove key from the ignition.

4. Press and hold the driver side door lock switch in the UNLOCK position
until step 8.

5. Insert the ignition key into the ignition lock cylinder and remove the key.
(Do not turn the ignition key in the lock cylinder)

6. Insert the ignition key into the ignition lock cylinder and remove the key.
(Do not turn the ignition key in the lock cylinder)

7. Insert the ignition key into the ignition lock cylinder.
(Do not turn the ignition key in the lock cylinder)
Leave key in the ignition cylinder.

8. Release the door lock switch. The vehicle will sound three beeps in order
to verify the Program Mode has been activated.

9. Press the LOCK and UNLOCK buttons together on the keyless remote and
hold unitl the vehicle beeps twice to verify that the keyless remote has been
successfully programmed. This may take approximately 15 seconds.

10. Perform the previous step (9) to program up to four keyless remotesm, including
any old ones.

11. Remove the ignition key to exit Program Mode.

Thanks for using Fixya - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 22, 2009

  • 1 Answer

SOURCE: unable to program my keyless remote for 2000 chevy malibu

I bought a 2000 chevy malibu and want to make a 1998 keyless enty remote work, how do i program it?

Posted on Feb 06, 2010

  • 181 Answers

SOURCE: 2008 chevy malibu. how to program keyless entry remote

You must take it to the Chevy dealer.

Posted on Mar 09, 2010

Testimonial: "thank you"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program new remote for 2008 chevy malibu


Since it Issa Malibu you have to take it to a Chevy dealer. They have a hand-held computer they plug into your car to program the new transmitter to the BCM (body control module). Call for estimate, probably $50-$60?

Apr 20, 2015 | Chevrolet Malibu Cars & Trucks

1 Answer

I've replaced my battery on my 2006 Chevy Malibu per Howard's excellent advice on Fixya. Now my remote for the locks and trunk release does not work. I have to manually unlock my drivers side door. An


There is no manual on board procedure to program a keyless remote to this vehicle. This vehicle requires special equipment be connected to the vehicle to program the remote. Dealer fix

Feb 02, 2014 | 2006 Chevrolet Malibu

1 Answer

How to program the remote starter on a 2011 chevy malibu


Hello! Take it to a dealership or an automotive locksmith...They have the proper scan tools to program your remote starter fob...Bring them all if you have more than one...Average cost is under $12...guru...saailer

Dec 25, 2011 | 2011 Chevrolet Malibu

1 Answer

Programming keyless entry key fob for 2000 chevy


you need to call the nearest chevy dealer with you vin, and get the part number from them, there are 2 numbers on the back of the remote, see if they match what the dealer tells you. Have an automotive locksmith program, should cost about 75.00 to do.

Jan 27, 2010 | 2000 Chevrolet Malibu

1 Answer

2000chevy malibu keyless entry problem need help


1. Close the vehicle doors.

2. Turn ignition to the ON position then OFF.

3. Remove key from the ignition.

4. Press and hold the driver side door lock switch in the UNLOCK position
until step 8.

5. Insert the ignition key into the ignition lock cylinder and remove the key.
(Do not turn the ignition key in the lock cylinder)

6. Insert the ignition key into the ignition lock cylinder and remove the key.
(Do not turn the ignition key in the lock cylinder)

7. Insert the ignition key into the ignition lock cylinder.
(Do not turn the ignition key in the lock cylinder)
Leave key in the ignition cylinder.

8. Release the door lock switch. The vehicle will sound three beeps in order
to verify the Program Mode has been activated.

9. Press the LOCK and UNLOCK buttons together on the keyless remote and
hold unitl the vehicle beeps twice to verify that the keyless remote has been
successfully programmed. This may take approximately 15 seconds.

10. Perform the previous step (9) to program up to four keyless remotesm, including
any old ones.

11. Remove the ignition key to exit Program Mode.

Thanks for using Fixya - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 22, 2009 | 2000 Chevrolet Malibu

1 Answer

Program a keyless entry remote on a 2000 chevy malibu


PROGRAMMING
Method One
Sit in driver's seat
Close all doors
Press and HOLD UNLOCK button on door lock switch.
Insert and remove ignition key twice. Do NOT turn ignition switch
Insert ignition key a third time and leave it in the ignition switch. Do NOT turn ignition switch
Release door lock switch.
A chime will sound three times indicating remote programming active
Press and HOLD the LOCK and UNLOCK buttons on each remote for 5 seconds
A chime will sound twice for each remote: indicating successful programming
Remove the key from the ignition switch to exit programming
Method Two
Remotes can be programmed using diagnostic equipment.

Jul 08, 2009 | 2000 Chevrolet Malibu

2 Answers

Unable to program my keyless remote for 2000 chevy malibu


take key fob to a cparts store , most have a tester on the counter

Jun 08, 2009 | 2000 Chevrolet Malibu

1 Answer

Program a keyless enrty remote start 2004 chevy malibu


Dealer only If you find a different means let me know

Apr 07, 2009 | 2004 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...