Question about Mitsubishi Cars & Trucks
Have you checked the stater solenoid (located on the top of the starter motor) wire for 12+ volts when the key is held in the crank position, do that first, you may have a defective starter switch.
Posted on Oct 31, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: car won't start, new battery,
This is not as big and expensive of a problem as it used to be. This is a communication error between the key, the ignition/lock cylinder, and the TDM. (Theft Deterrent Module) The hard part is finding which one is failing. You could chase this problem around into the thousands of dollars range. Or you can just bypass the whole system and never worry again.... This link explains how to bypass, symptoms of security failure, explanation why, and informative pictures. Good luck. http://vatspasslockpasskeysecurityhelp.yolasite.com/
Posted on May 08, 2011
SOURCE: 98 olds acheiva won't start,
If the security light is on, then it can only be one thing. The security system is failing and immobilizing your car. Go to this link and read up on the problem. The security light is a dead give away that the security is messed up. If you have no little black chip in the shaft of your key, then this means you must have a passlock that runs on the transponder. You need the PERMANENT fix from this site. http://vatspasslockpasskeysecurityhelp.yolasite.com/
Posted on Jun 16, 2011
if it does not crank then you might need a starter, if it does crank the you have to check to see if you have fuel pressure
Posted on Jul 01, 2011
SOURCE: My car was running, then
You need to have the cam angle and crankshaft position sensors checked. These are 2 parts which enable the ignition system to fire. If these are ok then check that the rotor in the distributor is turning when you crank the engine.
If it is not turning then you have a cambelt/chain or gear problem which you will need to repair before it will start again.
Hope this helped.
Posted on Jul 20, 2011
starting fluid is a thing of the past. dont use it. this car doesnt have a carb, its a throttle body/ electronic fuel injection system. you most likely have a fuel pump or fuel pressure regulator issue. test the fuel pressure, should be anywheres from 35-50 psi
Posted on Oct 11, 2011
Tips for a great answer:
Jul 14, 2013 | 2003 Mercury Grand Marquis
Sep 02, 2012 | 2001 Dodge Grand Caravan
May 14, 2012 | 1999 Chrysler Town & Country
Mar 18, 2012 | 1998 Chevrolet Cavalier
Jul 01, 2011 | 1994 Cadillac DeVille
Jun 14, 2011 | 2002 Mercury Sable
Jun 09, 2011 | 1997 Chevrolet Tahoe
71 people viewed this question
Usually answered in minutes!