Question about Jaguar Cars & Trucks
How can i open it
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Hood Won't Open, and Lever Broke
Hi viper852004 , the only way you can do this is to remove the front grills and then you will be able to see the 2 sprung bonnet pegs, you will need to loosen the adjusting nut where it screws into the hood and unscrew it until it becomes unattatched from the hood, do this for both pegs and then you should be able to release the hood to fix the problem. the pegs will need to be reinstalled before driving the car as the hood will not close, hope this is of some help, regards mark.
Posted on Jan 26, 2009
one way would be to take off the bumber and pry it open. these cars should have back up plans but they dont. lol once you get it open try going to a junk yard and taking one out of another car. if not then buy one and get it put in professionally because its very difficult to do.
Posted on Jun 04, 2009
It can be a pain, even for a skill mechanic, BUT you have to get under and trip the leaver or sometime if the cable broke on the inside you can strip the cable shroud and use plyers to pull the cable
Posted on Jun 10, 2009
You may be able to disconnect the cable behind the broken pull, then use a set of pliers to activate (pull) the cable within the sleeve - Otherwise you'll probably have to see a mechanic or body shop, as they are difficult to access when the hood lock is engaged...
Posted on Aug 22, 2009
You'll have to remove part of the grill and try to access the latch from inside. Yoy may have to unbolt the entire thing, but make sure you mark it 1st so that you know how to put it back in the EXACT spot it came from. Then once out, you can extracate it from the latch pin on the hood, replace your cable and start fresh. Good luck, this is one of those things that no matter how long you've been working on cars, its always hard to do!
Posted on Sep 12, 2009
Tips for a great answer:
Oct 06, 2015 | Geo Cars & Trucks
Mar 22, 2015 | Dodge Cars & Trucks
Jan 01, 2011 | 2000 Chrysler Cirrus
Sep 10, 2009 | 2000 Chevrolet Blazer
Jun 10, 2009 | 2000 Jeep Cherokee
May 09, 2009 | Chevrolet Blazer Cars & Trucks
Jul 15, 2008 | 1994 Chevrolet Caprice Classic
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: