Question about Cars & Trucks

Open Question

Need to find a service manual and a parts manual for a cushman truckster model #898461

Truckster Model #898461-9020

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johntunney
  • 887 Answers

SOURCE: I have a 1985 3 wheeled Cushman truckster I'm trying to remove the rear brake druma from. Anyone got any Ideas?

that's because the shoe is worn a groove into the drum and now theres a lip that the pad is grabbing on. you need to look on the backside of the drum you will see a hole or a rubber plug pull the plug. look in the hole with a flash light. there is a star wheel. you need to keep turning the wheel to loosen brake shoes then the drum will slide off like butter. not shure what way to turn wheel, try one way if it gets hard fast go the other way until it stops. use a straight screwdriver it pry up or down on the wheel. the wheel is for adjusting the brakes so your backing them off all the way so they are smaller and the lip on the drum will fit passed it.

Posted on Mar 15, 2013

  • 42158 Answers

SOURCE: How much compression should a Cushman truckster with a omc engine have

cranking compression pressure is 130psi engine hot.
go on line , type in marin.edu and there is a full manual for the engine.
I found it by going google and typing in--- compression pressure for cushman truckster omc engine.

Posted on Feb 08, 2015

Testimonial: "Thanks Bill. I will checkout the web site. Your information was very helpful. Thanks again."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find a wiring diagram for a cushman electric tug model number 898340?


Best and fastest way is to go to Google.com and type in the above information. should do the trick and they even have the manual and/or instructions. Good Luck!

Jul 25, 2016 | Cars & Trucks

1 Answer

I am looking for a carberator for my antique Cushman binder engine


we need to know what engine make and model you have before anyone can tell you that
is it updraft, down draft , side draft fitting on the inlet manifold research shows that they used a husky engine early on so add if it is air cooled or water cooled engine

May 26, 2016 | Cars & Trucks

1 Answer

Need manual for 1989 3wheeler cushman. 8915-898454


Go to cushman.com with both serial nums and they can get the right manual for you

Jul 01, 2015 | Cars & Trucks

1 Answer

How much compression should a Cushman truckster with a omc engine have


cranking compression pressure is 130psi engine hot.
go on line , type in marin.edu and there is a full manual for the engine.
I found it by going google and typing in--- compression pressure for cushman truckster omc engine.

Feb 07, 2015 | Cars & Trucks

1 Answer

Recently had major storm damage to my Cushman 898611 flatbed truck. I need to find a way to have body work repairs estimated, but don't have a cost listing for the different body parts that w


Go on line to Cushman manufacturing. They may or may not have a price list for replacement parts. If nothing else they should have a contact number so you can get a price out on the needed parts. Best of luck.

Oct 09, 2014 | Cars & Trucks

1 Answer

I am still trying to get the brake drums off my 1985 3-wheeled Cushman truckster.


what you want to use is a puller that can pull closest to the taper as possible. apply pressure to a pretty good amount then add heat. Sounds a little crude but it is effective. when you apply heat try to get it pretty even around the drum but only where the taper makes contact to the drum

Mar 16, 2013 | Cars & Trucks

1 Answer

I have a 1985 3 wheeled Cushman truckster I'm trying to remove the rear brake druma from. Anyone got any Ideas?


that's because the shoe is worn a groove into the drum and now theres a lip that the pad is grabbing on. you need to look on the backside of the drum you will see a hole or a rubber plug pull the plug. look in the hole with a flash light. there is a star wheel. you need to keep turning the wheel to loosen brake shoes then the drum will slide off like butter. not shure what way to turn wheel, try one way if it gets hard fast go the other way until it stops. use a straight screwdriver it pry up or down on the wheel. the wheel is for adjusting the brakes so your backing them off all the way so they are smaller and the lip on the drum will fit passed it.

Mar 15, 2013 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...