Question about 1996 Chrysler Cirrus
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The throttle position sensor may be misaligned. This tells the computer how much throttle is being applied, and when they go bad, or come out of alignment, the idle tends to get up there. If that's not the issue, remove your air cleaner, the housing and everything until you get to the MAP sensor. Give it a good spray with carb cleaner, let it dry and replace the air cleaner with a new one. If the MAP sensor detects minimal air flow, the computer jacks up the idle to compensate.
Posted on Nov 07, 2008
The coolant drain plug is located on the bottom left side of the radiator when looking from front of car. To access it you must remove the passenger side fog light and push the rubber cover out of the way.
Posted on Jun 23, 2009
You will have to remove the upper intake manifold to replace the rear plug.There are no shortcuts ,and besure to replace the upper intake gasket as well.
Posted on Jul 28, 2009
The crank sensor should be found at the front by the crank pully. it is bolted to the engine wuth a wire connection plug on it.
Posted on Sep 28, 2009
Tips for a great answer:
Apr 05, 2016 | Chrysler Cars & Trucks
Nov 24, 2015 | Cars & Trucks
Jul 07, 2014 | 1996 Chrysler Cirrus
Aug 20, 2012 | 1996 Chrysler Cirrus
Jul 11, 2011 | 1996 Chrysler Cirrus
Feb 07, 2010 | 1996 Chrysler Cirrus
Oct 06, 2009 | 1996 Chrysler Cirrus
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: