a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0121 HYUNDAI - Throttle/Pedal Position Sensor/Switch 'A' Circuit Range/Performance
Possible causes - Faulty throttle position sensor - Throttle position sensor harness is open or shorted - Throttle position sensor circuit poor electrical connection - Faulty Engine Control Module (ECM) What does this mean? When is the code detected? Malfunction is detected when an excessively low or high voltage from the sensor is sent to ECM. Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P0121 Hyundai Description The throttle position sensor (TPS) responds to the accelerator pedal movement. This sensor is a kind of potentiometer which transforms the throttle position into output voltage, and emits the voltage signal to the Engine Control Module (ECM). In addition, the sensor detects the opening and closing speed of the throttle valve and feeds the voltage signal to the ECM. Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
Also includes links to other forum threads discussing the code. ... P0122 Code -Throttle Position Sensor/Switch A Circuit Low Input ... I have 6 codes that stay the same. all the rest don't stay after reset. codes are P0106,P0107,P0108,P0122 ...
Jul 11, 2011 - Uploaded by Jerry Ferguson
Kinda important - Before removing the old throttle position sensor, snap a photo of its position with your phone ...
Read more: http://engine-codes.com/p0120.html#ixzz3Dcx3VCPs
4- P0220 Possible causes
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
fly by wire. Throttle body failure, clean it and pray. bad TPS wires at same place. - Faulty electric throttle control actuator (TP sensor 1 and 2) - Throttle Position Sensor harness is open or shorted - Throttle Position Sensor circuit poor connection - Faulty accelerator pedal position sensor http://helpforcars.net/obd_codes/p2135_suzuki.html
P0122 ACURA - Throttle Position Sensor 'A' Circuit Low Voltage.Possible causes- Faulty throttle position sensor. - Throttle position sensor harness is open or shorted - Throttle position sensor circuit poor electrical connection When is the code detected?An excessively low voltage from the Throttle Position Sensor (TPS) is sent to Engine Control Module (ECM).
Your vehicle has electronic throttle control . Position sensor's in the gas pedal an the throttle body , inputs to the Throttle Actuator Control Module
The TAC module is the control center for the throttle actuator control system. The TAC system is self-diagnosing and provides diagnostic information to the PCM through a dedicated serial data line. The TAC achieves throttle positioning by providing a pulse width modulated voltage to the TAC as directed by the PCM.
The throttle actuator control (TAC) system delivers improved throttle response and greater reliability and eliminates the need for mechanical cable. The TAC system performs the following functions:
• Accelerator pedal position sensing
• Throttle positioning to meet driver and engine demands
• Throttle position sensing
• Internal diagnostics
• Cruise control functions
• Manage TAC electrical power consumption
The TAC system components include the following:
• The accelerator pedal position (APP) sensors
• The throttle body assembly
• The throttle actuator control module
• The powertrain control module (PCM)
Accelerator Pedal Position (APP) Sensor
The accelerator pedal assembly contains 2 individual APP sensors within the assembly. The accelerator pedal position (APP) sensors 1 and 2 potentiometer type sensors each with 3 circuits:
• A 5-volt reference circuit
• A low reference circuit
• A signal circuit
The APP sensors are used to determine the pedal angle. The control module provides each APP sensor a 5-volt reference circuit and a low reference circuit. The APP sensors then provide the control module with signal voltage proportional to pedal movement. APP sensor 1 signal voltage is low at the rest position and increases as the accelerator pedal is applied. APP sensor 2 signal voltage is high at the rest position and decreases as the accelerator is applied.
Throttle Body Assembly
The throttle body assembly consists of the throttle body, the throttle position (TP) sensors, and the throttle actuator motor. The throttle body functions similar to a similar to a conventional throttle body with the following exceptions:
• An electric motor opens and closes the throttle valve.
• The throttle blade is spring loaded in both directions and the default position is slightly open.
• There are 2 individual TP sensors within the throttle body assembly.
The TP sensors 1 and 2 are potentiometer type sensors each with 3 circuits:
• A 5-volt reference circuit
• A low reference circuit
• A signal circuit
The TP sensors are used to determine the throttle plate angle. The control module provides each TP sensor a 5-volt reference circuit and a low reference circuit. The TP sensors then provide the control module with signal voltage proportional to throttle plate movement. Both TP sensor signal voltages are low at closed throttle and increase as the throttle opens.
- Engine Light ON (or Service Engine Soon Warning Light) - No throttle response
- Harness or connector (The TP sensor circuit is open or shorted.) - Electric Throttle Control Actuator (or Throttle Body Motor) - Accelerator Pedal Position Sensor (APP)
Electric Throttle Control Actuator consists of throttle control motor,
throttle position (TP)sensor, etc. The throttle position sensor responds
to the throttle valve movement. The throttle position sensor
has the two sensors. These sensors are a kind of potentiometers which
transform the throttle valve position into output voltage, and emit the
voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
When is the code detected?
An unexpected voltage from the TP sensor is sent to ECM.