Question about Chevrolet Cars & Trucks

1 Answer

2004 chevy venture after shuting off wipers they return to off position then go back and forth 3 to 4 inches for 30 seconds and dont go back to park position.sometimes after shut off ok. when restarting vehichle they automaticly come on move 3 to 4inches back and forth awhile then dont shut off in park position

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 444 Answers

Multi funtion switch has to be replaced.

Posted on Oct 30, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy venture wipers catch on turning off


take off the nuts holding the wipers on.now adjust both to the parking position .then tighten the nuts.fit the cover back on.

Dec 22, 2013 | Cars & Trucks

1 Answer

1999 chevy venture, windsheild wipers only work on high , and does not go into park position unless you are close to park position


I would be looking at replacing the wiper motor....the wiper switch is just that, a switch to tell the wiper motor what to do.....most of the wiring is housed internal of the wiper motor such as the park circuit and the speeds........osunds like an internal fault.....replacement would be advised

Feb 21, 2011 | 1999 Chevrolet Venture

2 Answers

I an '03 Chevy Venture van whose windshield wipers won't go down.


Your windshield arm is in need of repositioning. Take off the cap on the windshield arm and loosen the nut under the cap. Reposition the arm so that it faces 180 degrees flat to the passenger side of the car. Tighten the nut. This should solve the problem you've described.

Apr 11, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Wipers on 97 chevy venture won't go down when turned off.


The wipers appear to Malfunction by leaving the wipers up after turning the wipers off. I found problem to be that corrosion sets in between the CAMS plates that circle in an opposing fashion and does not let the wiper arms park correctly. Be very careful with this mechanism if you have the cowling off TURN the KEY and WIPERS OFF and watch your fingers so you don't get them caught.

WARNING if you leave the power on and try to move the arms This cam mechanism springs to life and will try to self park the wipers on their own so Turn the Power and Wipers Off.

SOLUTION: 1. With the ENGINE COLD, Spray a lubricant that FREE'S CORRODED PARTS like WD-40 between the gap of the 2 CAM Plates and on Top of the plates, or use some other automotive parts lubricant that free's corroded parts(let it soak for 5 minutes). 2. Gently Try to manually move the arms back and forth a little bit so that the spray works into the parts. 3. This may not be necessary but I had to do this the first time. There is a notch in the top cam that has a STUD that locks the 2 CAMs together. You can push on this STUD to unlock the cams by manually moving the wipers(use a screw driver to push on the STUD and have a friend gently move the wipers manually. Spray the area LIBERALLY with with the Lubricant Spray and see if you can move the CAMS back and forth and work the lubricant in.

Then with the wiper cover out of the way and all tools clear Try to cycle the wipers HIGH and LOW, ON and OFF a few times it may stick the first couple times with the wipers in the up position but I am confident that the lubricant will work its way in and free these CAMS the way they are supposed to. Your wipers should self park after cycling them after 5-10times. This should solve most of the problems with these wipers and should be re-lubricated as needed. Clean up any extra lubricant Put the wiper cover back on. Hope this Helps

The CAM for the wipers that is about $85 at your local GM dealer. It has instructions on how to install it correctly in the box the part comes from. Good luck! and thenk you for using Fixya

Mar 15, 2010 | 1997 Chevrolet Venture

1 Answer

I am trying to replace the front wiper motor for my 2001 chevy venture. The wipers are not parking fully down, and the intermittent setting parks the wipers about half way up until it is ready to wipe...


Check that you have connected the wiper motor correctly - ensure that you havent inadvertently got the polarity wrong!.
Leave the wiper arms off until you get the motor to run and park using the normal wiper on/off switch.
The motor 'park' control switching is normally an integral part of the motor drive gear and is not adjustable.
During your testing, affix a temporary indicator pointer to the end of a wiper arm drive shaft (use masking tape or similar) to prevent damage to motor or levers.

Jul 11, 2009 | 2001 Chevrolet Venture

1 Answer

98 Chevy Venture front windshield wipers


I found problem to be that corrosion sets in between the CAMS plates that circle in an opposing fashion and does not let the wiper arms park correctly. Be very careful with this mechanism if you have the cowling off TURN the KEY and WIPERS OFF and watch your fingers so you don't get them caught.
WARNING if you leave the power on and try to move the arms This cam mechanism springs to life and will try to self park the wipers on their own so Turn the Power and Wipers Off.
SOLUTION: 1. With the ENGINE COLD, Spray a lubricant that FREE'S CORRODED PARTS like WD-40 between the gap of the 2 CAM Plates and on Top of the plates, or use some other automotive parts lubricant that free's corroded parts(let it soak for 5 minutes). 2. Gently Try to manually move the arms back and forth a little bit so that the spray works into the parts. 3. This may not be necessary but I had to do this the first time. There is a notch in the top cam that has a STUD that locks the 2 CAMs together. You can push on this STUD to unlock the cams by manually moving the wipers(use a screw driver to push on the STUD and have a friend gently move the wipers manually. Spray the area LIBERALLY with with the Lubricant Spray and see if you can move the CAMS back and forth and work the lubricant in.
Then with the wiper cover out of the way and all tools clear Try to cycle the wipers HIGH and LOW, ON and OFF a few times it may stick the first couple times with the wipers in the up position but I am confident that the lubricant will work its way in and free these CAMS the way they are supposed to. Your wipers should self park after cycling them after 5-10times. This should solve most of the problems with these wipers and should be relubricated as needed. Clean up any extra lubricant Put the wiper cover back on.

Dec 14, 2008 | 1998 Chevrolet Venture Cargo

1 Answer

Windshield wipers stopping or not working at all


This reply probably too late but -
 Is this a wiper motor problem?
The motor may be OK but the parking switch has likely failed.  It should normally supply power until they reach their parking spot unless the main operator switch is still on and this probably controls a relay that may be faulty.
If you have had the problem corrected, you might post the problem found back here as a comment to aid others.

Nov 13, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...