Question about Chevrolet Cars & Trucks
Dash lights not working have been told you must replace whole cluster
If it was a GM dealer who told you that belive them, Any body allse don,t belive it.
Posted on Oct 30, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: chevy steering wheel controls
You first have to disarm and remove the air bag (unscrews with bolts from behind the steering wheel) and then you will see the screws for the switches. Only the silverado awitches will work.
Posted on Jan 29, 2009
i had the same problem, and it turned out the coil pack was moulding inside wich stopped the spark all together, i ended up changing my coil pack and putting on new wires because the ends connected to the coil were very corroded and that cures the not running part just fine
Posted on Jul 01, 2009
Having the same exact problem but with my 1999 escalade. Thought it was the actuator bought a new one installed it transfer case would engage but front end wouldnt lock. Took it out of housing left it plugged in got a friend to go through all the 4wd for me and the plunger never moved out the actuator. Checked my wiring harness which is a four prong ann it had one hot prong like it is suppose to. Traced wires even replaced dash switch same problem. Taking it to local dealership tom to have it checked for codes. I was told it could be the transfercase actuator even though its workin that actuator is what sends power to the front to engage the actuator to lock the differential.
Posted on Sep 16, 2009
to remove the dash in your truck you will need to dedicate about 8-10 hours. first start with removing your kicker panels, then the plastic covers on your a-pillars. remove the bezels around your instrument panels. you should be able to see some black screws by now, they should be a 7mm some may be a 5.5mm start removing all the screws you can. next you will need to un plug all of your switches, airbags(yellow plugs), 12v accessory plugs, be sure to remove your battery cables before unplugging all of this. your dash cover is a pain to remove so be patient with it or you will break it easily. to remove your dash cover remove the screws in the front and you will have to pop the back of dash up then remove. next you will need to remove your steering wheel/column this is easily done however you will need alot of extensions for your ratchet to do this. after pulling your steering wheel/column remove the four screws by your windshield to remove your sub-dash i believe they will be a 10mm. remove your sub-dash. next you will need to remove the dash support frame, you will need a 15mm and a 10mm socket to do this, i believe there is 5 bolts holding this on. if needed you can remove the black box that holds your fan heater core blender door cab filters and etc... to do this you have to remove the ac hoses coming out of your dryer can going into the firewall, this will bleed out all of your freeon, next remove the heater hoses, now there are 7 bolts or nuts to remove on your firewall, when you remove those you can pull out the black box.
Posted on Nov 06, 2009
Tips for a great answer:
Jan 28, 2015 | 2002 Chevrolet Silverado
Dec 17, 2013 | 2003 Chevrolet Silverado 1500
Jul 19, 2011 | 2005 Chevrolet Silverado
May 29, 2011 | 2004 Chevrolet Silverado
Jan 10, 2010 | 2005 Chevrolet Silverado 2500HD 2WD
Nov 07, 2009 | 1999 Chevrolet Silverado 1500
Sep 08, 2009 | 2005 Chevrolet Silverado 3500
Apr 17, 2009 | 1998 Chevrolet Express
Oct 16, 2008 | 2003 Chevrolet Silverado 2500HD
423 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: