Question about Cars & Trucks

Open Question

Nordic remote starter doesn't start car only works for locks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: remote starter does not work but will unlock and lock doors.

I have a 2003 sierra and my remote starter would not work, it would lock and unlock only, checked out this site found the solution, tried it and in two seconds i solved the problem, Just press the lock button and the start button and viola it works again, thanks for all your help , GGGreat site glad i found it John

Posted on Jan 11, 2009

Ad
emissionwiz
  • 76673 Answers

SOURCE: remote starter does not work but will unlock and lock doors.

this function is preformed through the Body control module, this can be tested for faults by the dealer only.

Posted on Mar 23, 2009

  • 9 Answers

SOURCE: remote starter does not work but will unlock and lock doors.

depending on your alarm which it sounds like a viper model maybe? on my 02 you have to incorporate a factory alarm bypass module in order to be able to start the truck, they run about 100.00 bucks and have to be profssionally installed. The truck wont start because the computer isnt recieving the proper starting sequence due to the factory alarm

Posted on Jul 02, 2009

  • 409 Answers

SOURCE: Remote Car Starter with tachless vehicle. (Tach Lock-out)

Did you read the requirements for your particular system? The reason I ask is most remote starters will not work on a vehicle with a manual transmission, because of thier need to have the clutch pedal depressed in order to engage the starter.

Posted on Apr 17, 2010

  • 21 Answers

SOURCE: When I use my remote starter & door

The rear doors probably dont come w accuators in them. Meaning that the rear doors alot of times don't have power options. If you are certain that your rear doors have factory power locks then I would say it's a wire somewhere...did you try a double click of the unlock button. My two door chevy truck unlocks the driver door with one click and the pass door requires a double click. Hope this helps !

Posted on Mar 09, 2011

Testimonial: "**I posted this as a comment. But thanks bro!** Thanks bro. I was hoping it would be something dumb I could do, however my wife may not let me. I am n"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote car starter from autostart on a grand am 03 won't start or locks won't work after it died for about a week then changed the batteries


Check to be sure the new battery is a good new one, they set on the shelves for some time ya know. Then make sure it goes in the correct direction.Then refer to your owners manual if it needs reprogrammed.

Feb 18, 2013 | Cars & Trucks

1 Answer

Vauxhall Astra's remote suddenly stopped working.


Start troubleshooting by redoing the "mechanic's" work, making sure that the correct and unblown fuses are in the correct places.

May 13, 2017 | Cars & Trucks

2 Answers

Car wont start, NOT battery


sometimes a rubber mallet doesn't work on the stater, you actually have to hit it with something stronger, like a hammer while turning it over. If not check to see if you have a pro lock on your vehicle because if that becomes just a little loose it won't start.

Apr 23, 2012 | 2004 Chrysler PT Cruiser

1 Answer

Truck has electrical power but won't turn over. I think I can hear the starter solenoid engaging. Not sure. where do I start trouble shooting?


Safety first!--Make sure you're in park & brake on-- Try shorting across the starter terminals with a screwdriver,if the bendix kicks in & nothing spins,remove the starter & put in bench vice ,(or hold down securely), & jump with cables.--REMEMBER POLARITY--If the starter spins you are in deep *******---something in the motor is probably locked up.(If the starter doesn't spin get a new one.)

Sep 24, 2011 | 2007 Nissan Xterra Off Road

2 Answers

I have a 2003 hyundai sonata and i dont have the remote for the stock alarm. My alarm keeps going off and my car wont start. I bought a new battery and even tried the key in the door still no luck.....


The 2003 Sonata is equipped with a 'starter KILL' burglar alarm system with disables the starting system (using a N/C 'contacts' configuration instead of a N/O contacts configuration). N/C=Normally closed, and N/O=Normally open contacts. When the alarm goes off with a MY Sonata, the only way to DISARM it is with the key fob (remote) originally programmed for it (unless you purchase a new remote & have it programmed for the vehicle at an authorized Hyundai Service Department). NOTE: So long as the keyless entry & burglar alarm system is functioning/operating normally, the alarm will keep going off and the STARTER KILL function will still prevent you from starting the vehicle. One option is left without purchasing a new remote and having it programmed.
1. When the alarm goes off, get into the vehicle and insert the ignition key into the ignition.
2. Turn the key to the 'RUN' position (NOT the ACC position) and wait for the alarm to STOP (usually about 3 to 5 minutes).
3. The engine should then start using the ignition key.

If this procedure doesn't work, the problem will need further diagnosis by a qualified/certified Hyundai Service Technician.

Hope this helps

Aug 27, 2011 | 2003 Hyundai Sonata

1 Answer

My 2000 ford focus will not start. It does not make any noise but the lights go on. It doesn't even turn over. My mechanic disconnected the remote car starter and that seemed to help but now I'm...


If it's not a dead battery, it could have bad connections. Check battery connections for tightness

Check the battery cable connection on the start solenoid, usually very near the battery. Check all wires on the sloenoid.

Check solenoid cable to starter for tightness at both ends.
If starter & battere are good it has to be one of above'

Good Luck

Jun 30, 2011 | 2004 Ford Focus

1 Answer

It's getting gas, the battery's good, the fuel pump is working, & I just replaced the rotor, cap, plugs & wires. Every few weeks or so though, she just doesn't start. The only...


At first blush, it sounds like the distributor cap isn't seated. Since it's happening when the engine is cold and at night, I'm guessing condensation is causing the problem. Try spraying starter fluid on the cap the next time the car doesn't start. This will dispel any condensation. If the car starts, that would be a good place to start.

Jun 05, 2011 | Volkswagen Fox Cars & Trucks

2 Answers

1991 Lexus 400 - engine doesn't start - battery seems charged - 12.3 volts - makes clicking sound only - doesn't turn over at all.


Is it one click or multiple clicks. If it's multiple clicks, it sounds like a dead battery. Voltage isn't always an indicator of a good battery, you need to have enough cranking amps to be able to start an engine also. If you have dash lights and it only clicks once, you could have a bad starter. An easy way to check this is to try and jump start the vehicle. If it starts up with a jump start, you need a new battery. If it still doesn't start up and it just clicks, you probably need a new starter.

Good Luck!
~Brandon

Jun 01, 2011 | 1991 Lexus LS 400

1 Answer

I got the Viper 5101 remote start installed in my 2007 Hyundai Sante Fe at best buy. The remote works for auto start, but will only lock and unlock the doors sometimes. It seems like if I unlock or lock...


I would take it back and tell them they need to fix it. it sounds like a wire for the lock/unlock may of fallen off or there is a problem with the remote stare module. wires tend to fall off if all the used were crimp connectors and didn't solder the wires together.

Jun 01, 2017 | Hyundai Santa Fe Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...