At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pull the stereo fascia off and see if you can check what might be broken. You're probably going to have to pull the dash off though, be careful not to snap clips as you remove it.
nissan xtrail . same name used 2004 -2015 . what year model when was it last serviced if it has a duel clutch fitted .. start there ...they fail any leaks in the gearbox or transfer case
New oil pumps will not work until they are primed . Pull the pump and remove the gears cover Fill the space around the gears with Vaseline / grease and replace the cover/pump. When the engine starts to spin the gears will move the Vaseline out into the oil galleys and create a vacuum which will suck up the oil. The Vaseline/ grease will disperse back into the sump with no ill effects. Ensure the oil pick up pipe is securely in place.
purchase a special o2 sensor removal tool from an auto tool shop. when replacing do not use any sealants or neversieze as ther affect the continuity of the current and affect the CPU reading the sensor.
Pull off the cap from the top of the gear knob which has the numbers on,under this you will find a torx screw,undo this screw and the knob will pull off
Some gear knobs have a set screw on them. Look at the base of the knob all the way around knob. If there is no set screw than it is on just tight with thread lock. You will need to use some force to remove. You also need to turn in a counter clockwise motion to remove.
Hi joserosa if this is a manual gearbox you just have to grip the gear knob and pull upwards until the gear knob is removed, the same principle is applied for a auto box but hold in the release button while removing, regards Mark.
×