Question about 1996 Pontiac Bonneville SE CA Value

1 Answer

Can't get my blower motor out of my 1996 Bonneville

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 76,846 Answers

You will need to remove the engine's valve cover at the rear of engine to remove the blower motor, also replace the blower motor resistor while you are in there.

Posted on Oct 30, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
abauto
  • 353 Answers

SOURCE: ac/heater blower relay

Center Rear Of Engine Compartment, At Cowl

Posted on Jul 25, 2009

Testimonial: "Thanks a lot this solution was very helpful. I really appreciate it!!!!!!!!!!"

csmock132
  • 4669 Answers

SOURCE: 1992 bonneville sse w/ac replaced blower motor +

You replaced the blower control module or the blower control panel on the dash? This has automatic temp control right?

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

INSTALL BLOWER MOTOR ON A 1996 BONNEVILLE


Hey Brian, I did find every thing you need at auto zone library, its all free and no spam, just log in and list your vehicle then go to repair guides, then open repair help now go to chassis electrical . and look to left and click on blower motor .
hope this helps , good luck.
Woody

Feb 24, 2015 | 1996 Pontiac Bonneville SE CA Value

1 Answer

My 1996 Chevy Blazer blower isn't blowing air. Fuse is ok. What next?


Faulty blower motor resistor or blower motor resistor connector faulty.Wiggle blower motor resistor connector with the ignition and fan switches on.

Jun 17, 2012 | 1996 Chevrolet Blazer

1 Answer

Blower motor relay 93 bonneville ssei


The blower motor relay is located center rear of engine compartment below right maxi fuse block see no. 7 below - the fuse you're looking for is the A/C fuse 30amp it powers the blower motor relay/motor itself

zjlimited_1962.jpg

Sep 30, 2011 | 1993 Pontiac Bonneville

1 Answer

The front a/c blower does not work, all fuses are good. please help


J, I am sending you some info to read but it appears that the most likely cause is the blower motor relay. Give the following notes a read and if you need some more help give me a buzz... Best of Luck..

1996 Chrysler Town & Country 3.3L, Vin R 1996 Dodge Grand Caravan ES 3.8L, Vin L 1996 Chrysler Town & Country LX 3.3L, Vin R 1996 Dodge Grand Caravan LE 3.8L, Vin L 1996 Dodge Caravan LE 3.8L, Vin L 1996 Dodge Grand Caravan SE 3.3L, GAS, Vin R, Eng Cfg V6 1996 Dodge Caravan Sport 3.3L 1996 Plymouth Grand Voyager SE 3.3L, GAS, Vin R, Eng Cfg V6 1996 Dodge Grand Caravan ES 3.3L, Vin R 1996 Plymouth Voyager Rallye 3.3L Customer Concern: Front blower does not work; no power to it. Fuse is OK. Tests/Procedures: 1. At the blower motor, there is a Dark Blue wire. This wire should have battery voltage whenever the key is in the "on" position. Power for the blower motor comes from the blower relay.

2. Access the front blower relay, it is located on the driver's side under the dash, near the junction block. There will be four wires going to it. The Dark Green wire should have battery voltage all the time. The Dark Blue wire is going to the motor. The Black/Orange wire should have battery voltage with the key in the "on" position. The Black wire should be grounded at all times. On this circuit, the relay is energized whenever the key is in the "on" position. Potential Causes: Front Blower Relay
Front Blower Relay Wiring
Heater Ventilation Air Conditioner (HVAC) Control Head
Tech Tips: The front blower relay is located under the dash, on the driver's side. It may be necessary to remove the junction block (fuse and relay box) in order to see it. Diagnostic Codes: None

Aug 28, 2011 | 1996 Chrysler Town & Country

1 Answer

1992 bonneville sse w/ac replaced blower motor +


You replaced the blower control module or the blower control panel on the dash? This has automatic temp control right?

Mar 31, 2010 | 1992 Pontiac Bonneville

1 Answer

Need location on blower motor resistor on 1994 pontiac bonneville


58f261e.jpg

Fig. 1: The blower motor and fan assembly is mounted in the heater and A/C module, and is accessible from the engine compartment

GM Bonneville/Eighty Eight/LeSabre 1986-1999
Blower Motor - REMOVAL & INSTALLATION
(see Figures 1 and 2)
  1. Disconnect the negative battery cable.
  2. If necessary, tag and disconnect the number 2, 4 and 6 spark plug wires from the ignition coil and move the coil out of the way.
  3. For 1993-99 vehicles, remove the nuts and cross brace bar.
  4. Detach the electrical connections from the blower motor.
  5. Disconnect the cooling tube from the blower motor.
  6. Unfasten the screws securing the blower motor to the blower module assembly.
  7. Remove the blower motor and fan assembly from the module.
  8. If necessary, unfasten the nut attaching the fan to the blower motor shaft, then pull the fan from the blower motor.
68515cf.jpg

Fig. 2: You can disassemble the fan from the motor by removing the retaining nut


To install:
  1. If the fan was removed from the motor, position the fan on the shaft, then install the retaining nut. Tighten the nut to 12 inch lbs. (1.4 Nm).
  2. Position the blower motor and fan assembly to the module, then install the retaining screws. Tighten to 5 inch lbs. (0.6 Nm).
  3. Connect the cooling tube to the blower motor.
  4. Attach the electrical connector to the blower motor.
  5. On 1993-98 vehicles, install the cross brace bar and retaining nuts. Tighten the nuts to 18 ft. lbs. (25 Nm).
  6. If removed, install the coil and connect the spark plug wires, as tagged during removal.
  7. Connect the negative battery cable.

Hope this helped (remember rated and comment this).

Mar 26, 2010 | 1994 Pontiac Bonneville

1 Answer

Ac/heater blower relay


Center Rear Of Engine Compartment, At Cowl

Jul 25, 2009 | 1996 Pontiac Bonneville SE CA Value

Not finding what you are looking for?
1996 Pontiac Bonneville SE CA Value Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...