Question about 2004 Jeep Liberty

Open Question

How to take the back seat out of a 2004 jeep liberity?

Hi, im trying to get my back seat out and put some new carpet in and i don't know how to get the back seat out? there some bolt under it but it just seem not to work. is there an easlier way to take them out or which bolt is it?

Posted by on

3 Suggested Answers

  • 4 Answers

SOURCE: 3rd seat belt in a jeep wrangler

Bolting it in a third row seat? that'd be fairly easy...just need something solid to anchor it to (like a thick piece of metal) on the underside to put the bolt through. do the same with seat [lap] belts and that should solve any law issues (actually some states i believe don't "require" rear seat passengers to be belted in, but I'd strongly suggest it for the kids safety!)...my big question is where are you finding enough room for a 3rd row seat? wranglers aren't exactly loaded on space...

as for torque...wrangler seats are fully removable (makes it easy to wash mud and stuff out) so as long as the bolts tighten down (air gun preferably, but you can arm twist em if need be) you'll be fine, just make sure everything is as secure/sturdy as the factory seats

Posted on Dec 31, 2008

  • 158 Answers

SOURCE: rear middle seat belt in 2005 jeep grand cherokee will not work

take it to your dealer and tell them the problem they should be able to fix/relpace the seat belt

Posted on Aug 31, 2009

  • 6982 Answers

SOURCE: a support under the driver's seat in my 2004 Jeep

Since you are unsure what is broken I can't tell you how to fix it. BUT, You can go to just about any scrapyard and look at the seats they have, first to see what yours used to look like before it broke and then, if it is anything that will need welding etc, possibly to buy the seat you looked at (not terribly expensive compared to some repairs)

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Manually move power seat


I'm having this same issue, I"m the only one who drives the jeep and its just an extra vehicle, really don't want to put that much money into it if I can just manually move the seat to the furthest back setting.

Jul 24, 2012 | 1994 Jeep Grand Cherokee

1 Answer

2004 liberty power seat don't work can't find any fuse in owner's manual that's label any way related to the power seats


The seats are not fused they are on a circuit breaker. In the dash fuse block located on the end of the dash on the drivers side you should be able to see 2 metalic looking "fuses". Those are the circuit breakers. Circuit breaker 1 is for the power seat. You can try swapping them and see if the seat works. If it still doesn't work than you will need to check for power and ground at the seat.

You should be able to find a connector under the seat that has a red with light blue wire and a black with white wire. The red with light blue should have power all the time. The black with white is the ground.

Let me know what you find or if you have additional questions.

Oct 05, 2011 | 2004 Jeep Liberty

1 Answer

I want to know how to change the interior carpet in a monte carlo ss. I've already purchased the interior carpet


Hi,
Just remove the front seat, mid console box, and door plastic trims. If everything is taken off, you are ready to put the new carpet.
Hope that helps you out.

Aug 06, 2011 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I have a 2004 Chevy Impala and the radio is not putting out any sound. The display works but no sound.. Any ideas on whats wrong?


I also have a 2004 Impala with the same problem. I searched the computer and found that a connection in the wiring under the carpet and behind the passenger seat gets corroded from the floor being wet. I'm in the process of removing seats and carpet to find this problem and hopefully fix it. I'm sure that your door chime quit working too.

Jul 08, 2011 | 2004 Chevrolet Impala

2 Answers

Heater blower not coming on all the time and if it does it stays on low


your problem is either a bad switch or a bad blower!!
run a hot wire from the battery directly too the blower motor and see if it goes on hi if not then its a bad motor, if it does then its a bad switch!!!

Feb 27, 2010 | 2004 GMC Yukon

1 Answer

I have a 2004 Jeep Wrangler X. The passenger seat


there is a cable that has come loose from an anchor point, i suggest a new cable but you may be able to re secure it. malibu's have the same seat issue.

Dec 16, 2009 | 2004 Jeep Wrangler

1 Answer

Help Please electrical or fuse problem 90 Cherokee


Try looking under the hood for a Maxi fuse

Aug 08, 2008 | 2006 Jeep Liberty

Not finding what you are looking for?
2004 Jeep Liberty Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...