Question about Chrysler PT Cruiser

Open Question

Pt cruiser brake/shift interlock - PT Cruiser Chrysler Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mr BrokRench
  • 1623 Answers

SOURCE: BRAKE LIGHTS AND SHIFT INTERLOCK NOT WORKING

Hello Joe...The Aveo has had it shares of problems, and this is one of them....NHTSA issued several bulletins on the 04 Aveo...this following is the one pertaining to the shift interlock.....

Make : CHEVROLET Model : AVEO Year : 2004
Manufacturer : GENERAL MOTORS CORP.
Service Bulletin Num : 070730007 Date of Bulletin: APR 01, 2007
NHTSA Item Number: 10022265
Component: POWER TRAIN:AUTOMATIC TRANSMISSION
Summary:
AUTOMATIC TRANSAXLE/TRANSMISSION SHIFT LEVER MAY NOT SHIFT OUT OF PARK (REPLACE BRAKE TRANSAXLE SHIFT INTERLOCK (BTSI) SOLENOID). *KB

Take that bulletin number to your dealer and see if they can help.

Untill you can get it repaired heres a little tip for getting it out of park....There is a a little hole in front of their gearshift lever that can correct the problem, temporarily. It should say "brake interlock release" or something like that. With car running, put a key-size object into it and push down while moving the lever. It does not damage the transmission, it just releases the lock. (make sure your foot is on the brake)

Now for the brake light issue...do you have power at the switch you replaced? If so go to the relay and check there...if no power there it's probably a bad ground.

Also...you may or may not know, but the timing belts on these Aveos are prone to failure at aprox 50k ...these failures have caused severe engine damage.
Good luck...i hope the information i've provided you find useful.
Please time to rate me.

Posted on May 23, 2009

sandanrosie
  • 53 Answers

SOURCE: No tail lights on 2007 pt cruiser

check the bulbs the filiments could be broke, do you have a third brake lightand is it working this will help rule out a brake switch

Posted on Aug 28, 2009

  • 2002 Answers

SOURCE: 2004 PT Cruiser headlights and dash lights flicker

Your alternator is starting to show its age. If you get it tested you will likely find that under load it is not putting out 14+Volts. It is probably closer to 12 and it's time to retire it or get it rebuilt. If the battery is the same age as the alternator get it tested as well with a "load test" to make sure it is still healthy. Hope this helps.

Posted on Jan 18, 2010

  • 5 Answers

SOURCE: 2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...

GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP

Posted on May 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 merc gm shift lever stuck in park car will start steering wheel turns


You have a shift interlock problem . What kind of vehicle ? a mercury what ?
Shift Interlock System
The shift interlock system prevents shifting from PARK unless the brake pedal is depressed. The shift interlock system consists of a shift lock actuator mounted on the selector lever. If the ignition switch is in the RUN position, the shift lock actuator is disabled when the brake pedal is depressed.
If the selector lever will not move out of PARK with the key in the ON position and the brake pedal depressed, it will need to be unlocked manually.
Do the brake lights work ?
Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:

Visual Inspection Chart Mechanical Electrical
  • Damaged shift lock actuator
  • Damaged transmission control (TC) switch
  • Damaged shift interlock switch
  • Failed fuse(s):
    • F20 (10A)
    • F22 (15A)
  • Damaged wiring harness
  • Loose or corroded connections
  • Damaged shift interlock switch
Symptom Chart Condition Possible Sources Action
  • Shift interlock system does not release/lock correctly
  • Circuitry
  • Fuse(s):
    • F20 (10A)
    • F22 (15A)
  • Brake pedal position (BPP) switch
  • Brake shift interlock actuator
  • Brake shift interlock actuator module
  • Go To Pinpoint Test A .
PINPOINT TEST A: SHIFT INTERLOCK SYSTEM DOES NOT RELEASE/LOCK CORRECTLY Test Step Result / Action to Take A1 TEST THE BRAKE LIGHTS
  • Apply brake pedal and view brake lights.
  • Do brake lights illuminate?
Yes
GO to A7 .

No
GO to A2 . A2 TEST FUSE F22 (15A)
  • Key in OFF position.
  • Check fuse: Smart Junction Box (SJB) Fuse F22 (15A).
  • Is the resistance less than 5 ohms?
Yes
GO to A4 .

No
GO to A3 . A3 TEST THE CIRCUIT FOR A SHORT TO GROUND
  • Key in OFF position.
  • Disconnect: Brake Pedal Position (BPP) Switch.
  • Measure the resistance between pin 1 and ground.
    s7n~tr~en~file=n0039468.gif~gen~ref.gif
  • Is the resistance greater than 10,000 ohms?
Yes
GO to A4 .

No
REPAIR circuit for short to ground. TEST the system for normal operation
Do

Jun 19, 2016 | 2010 Mercury Grand Marquis

1 Answer

How do i remove the shift cable from a pt cruiser gt5 speed


Chrysler PT Cruiser shifter cable bushing replacement ...

? 5:28
https://www.youtube.com/watch?v=akgIKm1pQLM
May 21, 2014 - Uploaded by MotorCity Mechanic
Chrysler PT Cruiser shifter cable bushing replacement ... Part 1/2: 1999-2003 Jeep Grand Cherokee 4.0 ...

PT Cruiser manual stick shift cable bushing tip - YouTube

? 3:18
www.youtube.com/watch?v=mU0sgQn-0qw
Jun 19, 2015 - Uploaded by Justin Shiffler
PT Cruiser manual stick shift cable bushing tip ... how hard was this to replace? my right bushing is gone and ...

Shifter cable broken for the third time - YouTube

? 1:06
www.youtube.com/watch?v=MiHSkqSrsLY
May 8, 2013 - Uploaded by CJ Turner
Shifter cable broken for the third time ... Chrysler PT CruiserBrake Light Switch Replacement, Shifter Stuck .


Oct 29, 2015 | Cars & Trucks

1 Answer

I have a 2002 Chrysler PT Cruiser 5-speed manual transmission I just replaceed shift cable bushing and car won't start what else maybe an issue


is the neutral safety switch out of adjustment? or maybe the clutch safety switch?..check both for operation..bypass if necessary, but only in emergencies..interlock may not be aligned either..

Dec 14, 2013 | Cars & Trucks

1 Answer

My 2002 pt cruiser won't shift out of low.


the 2nd & 3rd gear solenoid needs replacing. It is mounted by the trans filter inside the trans pan

Jul 27, 2010 | 2002 Chrysler PT Cruiser

1 Answer

Can't get PT Cruiser out of park.


MAKE SURE YOUR FOOT IS ON BRAKE BEFORE U SHIFT.

Dec 06, 2009 | 2004 Chrysler PT Cruiser

1 Answer

I started my car 2004 PT Cruiser today and it won't come out of park. In the last month, I've noticed that it sometimes is hard to get it into drive/reverse, but this has never happened. We took out the...


Sounds like the shift lock solenoid is not working, there could be a couple of different things causing this. First thing I would check is the brake light switch witch is located under the dash on the brake pedal assy.. The second thing it could be is the shift lock solenoid its self, wich is located around or near the shifter.

Nov 24, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Ignition/gear shift


sounds like the park interlock cable is sticking.

Feb 14, 2009 | 2003 Chrysler PT Cruiser

4 Answers

Need to replace the shifter cable on a 2003 PT Cruiser


Have the EXACT same problem. 2005 Pt Cruiser w about 88,000 miles. Became hard to shift when cold and then bam ....something broke. Moves freely. I know I'm going to get screwed on this... what should it cost to have it fixed. The guy at a shop close by (figured close to make towing easier) started into this 'its a dealer only part and blah blah...at least an hour .... " He's going to send an estimate tomorrow. I'm in E. metro Atlanta

Feb 05, 2009 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...