Question about Fiat Panda

Open Question

Fiat panda 30 tappet settings

Panda 30 twin port head tappet settings

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 16 Answers

SOURCE: tappet settings

for that application best to go to Chilton hand book to find. O'reillys Auto parts and Autozone can look it up for you and give you the specifications by phone.

Posted on May 28, 2008

  • 653 Answers

SOURCE: Engine tappet clearances

According to http://freespace.virgin.net/tommy.sandham/databook.htm# Rocker Adjustment, the cold clearance is .008" intake/.018" exhaust in the non-GT 1500cc, and .012" intake/.022 exhaust on the GT. Sweet little car!!!

Posted on Mar 01, 2009

  • 249 Answers

SOURCE: Trouble removing the engine cover from Fiat panda 2006 diesel

i guess you got a chip then, look at the cover ithink 3 or 4, circles, fine screw driver and pop em out to see the 10mm nuts.

Posted on Aug 15, 2009

alicantecoli
  • 22095 Answers

SOURCE: FPSon apparaît. La voiture FIAT Panda ne

ingles tambien espa?ol ,

Posted on Dec 26, 2010

  • 184 Answers

SOURCE: I have a 1998 Holden

I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.

Posted on Apr 02, 2011

Testimonial: "Fantastic, very clearly explained and rapid response to my questions. Thank you."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheel change on a Fiat panda


Great car i saw it on top gear lol. To change a tire, you will need a car jack, lug wrench, and a spare tire. Just put the lug wrench on the bolts and spin away. Make sure that you undo the bolts in a "x" pattern.

Jul 29, 2016 | 2006 Fiat Panda 1.2

1 Answer

Torque settings on a fiat uno 1100 engine


Answer barbo(fiat mechanic) Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.

Oct 29, 2014 | Cars & Trucks

1 Answer

Poor pick after engine head got repaired


hi Medovi

poor pick-up and less miles per gallon after engine head repaired is due to two things could be done wrong during repair,
1: wrong tappets clearance, witch is suppose to be 0.30 MM inlet, 0.40 MM exhaust
2. wrong timing setting ( timing belt setting )
better to get your mechanics to double check it
good luck

Jan 06, 2014 | 2008 Fiat Palio 1.2

1 Answer

2005 fiat panda shows keylock on dash


a panda ,makes a change from the americans and their jugonauts,but iam confused here as to what code your putting in as these nice little motors never have many problems with the electrics unlike my pennance the renault in fact their very good these little pandas with very little going wrong even if the timing belt breaks the valves clear the pistons -these cars are ideal shoping trolleys and easy to park .Anyway back to question what code are you putting in here the radio code ?

Dec 28, 2012 | Fiat Cars & Trucks

1 Answer

Head bolt torque settings


Torques Punto 1100 year 1995

1st round: 20 Nm
2nd round: 30 Nm
3th round: add a quarter

4th round: ad another qourter

sequence:
8 6 2 5 10
7 3 1 4 9

This is the 'Fire' engine, also placed in the Uno and Panda.

Oct 08, 2012 | 2005 Fiat Punto 1.2

1 Answer

Where is the oil filter located on a 2008 Fiat Panda 1.2 petrol engine?


IF YOU DONT SEE OIL FILTER UNDER THE ENGINE NEXT TO OIL PAN OR ON SIDE OF ENGINE LOOK ON THE UPPER SIDE OF THE INTAKE MANIFOLD LOOK FOR A FILTER LOOKING HOUSING WITH A BUILT IN LARGE BOLT HEAD ON COVER HOUSING OIL FILTER IS IN THE HOUSING.

Oct 24, 2010 | 2007 Fiat Pininfarina

1 Answer

Trouble removing the engine cover from Fiat panda 2006 diesel


i guess you got a chip then, look at the cover ithink 3 or 4, circles, fine screw driver and pop em out to see the 10mm nuts.

Aug 15, 2009 | 2006 Fiat 124

1 Answer

1979 fiat spider 2000 pinan farina weber adha carb has very rough idle despite all my efforts to tune up exactly to specs what are some likley causes


tappets too tight
points too wide
strip and clean carb especialy the air passages
cracked distributor cap
spark plug breaking down
low compression
head gasket blowing between cylinders
no thermostat
air leak on inlet manifold/carb base

Nov 11, 2008 | Fiat Pininfarina Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...