Question about Dodge Dodge
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a diagram of you vehicle. Good Luck please leave a FIX YA comment if I fixed ya. http://www.2carpros.com/car_repair_information/tec_info/2004/dodge/durango/2004_dodge_durango_drive_belt_routing_diagram.htm
Posted on Dec 27, 2008
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Tips for a great answer:
Apr 04, 2017 | Cars & Trucks
Aug 03, 2010 | Dodge Ram 250 Cars & Trucks
Jul 12, 2010 | 1983 Dodge 600
Nov 18, 2009 | 1991 Dodge Ram 350
Nov 12, 2009 | Dodge D150 Cars & Trucks
May 10, 2009 | Dodge Ram 2500 Cars & Trucks
Apr 19, 2009 | 1978 Dodge Magnum
Mar 22, 2009 | 1998 Dodge Ram 1500 4WD
Mar 22, 2009 | 1998 Dodge Ram
185 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: