Question about 2008 Nissan Note 1.4

Open Question

Where is fuse for Nissan note rear wiper

Rear wiper fuse

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: Replace rear wiper on 2005 Murano

You probably already figured this out, but you have to remove the wiper arm completely in order to replace the wiper blade.

The blades are an unusual size (somewhere around 14 1/2") and I believe they are only available from a Nissan dealership. They include printed instructions in the box but just in case, this is from the official Nissan service manual:

88b7c7f.jpg

moz-screenshot-61.jpg9b7da18.jpg








Posted on Jun 29, 2009

Ad
FixurNissan
  • 61 Answers

SOURCE: my 07 nissan murano rear windshield wiper doesn't

You need to adjust the wiper arm location. Loosen the 12 mm or 10 mm nut that holds the rear wiper arm. Wiggle the arm until it comes off. Then turn on the rear wiper for a second and turn it off, leaving the key on. This way the rear wiper motor will do it's sweep, and them park where it's suppose to. Then reattach the rear wiper arm and secure the nut and recheck.

Thanks Jay!

Posted on Jul 22, 2009

  • 733 Answers

SOURCE: Nissan Titan - Where is the fuse for rear turn signals?

usually if the front are working then the rear should be too. check your light bulbs. if you tow stuff, check the wiring harness on the hitch.

Posted on Sep 07, 2009

Lloyd Six
  • 560 Answers

SOURCE: rear wiper not working have changed fuse screen

I think these earth off the boot hinges? Try spray the hinges with penetrating fliud like WD40

Posted on Nov 19, 2009

oneStan
  • 430 Answers

SOURCE: WHERE DO i FILL WIPER FLUID IN REAR FOR 2006

The fluid for both windows comes from the front resivoir. The pump there is suited to pump either to the front or to the rear based upon your operation of the switch & if the rear isn't working, the line will need to be removed near the pump & checked for obstructions.

These can be cleaned with a vacuum tester, the kind that lets you pump the unit & draw a vacuum, connected to the hose, it will draw any debris back out of the tube. You probably don't want to try & force fluid through the hose as it won't fit through the washer nozzle.

good luck

Posted on Feb 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find switch for rear wiper. Rear wiper not working. 99 nissan pathfinder.


Check it wireing to open dickky. I think any cut on wire you found. Other check fuse off wiper in fuse box care fully.

Jun 18, 2016 | 1999 Nissan Pathfinder

1 Answer

My 2008 nissan pathfinder's rear wiper suddenly stopped working. It is not a fuse or motor or ground problem. Help?


the switch that you turn to ge the wiper to wipe -- controls the power to the wiper motor. You need check the wiring from the switch to the wiper motor -- for break or disconnects. you may have to replace the switch oor install a dash mount switch instead And bypass the stock switch.

Dec 26, 2014 | 2008 Nissan Pathfinder

1 Answer

Repair rear wiper


check the body control module under the dashat the center consel. the body control module runs everything inside..

Jan 28, 2013 | 2009 Nissan Pathfinder

1 Answer

Nissan Quest 1999 Van - rear wiper seems to be running even if there is no key in the ignition and drains the battery, pulled RR Wiper fuse 10 Amp and it did not help. When the key was inserted into rear...


If you pulled the correct fuse for the rear wiper (Under the Dash) (or under the hood?) sometimes there are 2 fuses. But if you pulled the correct fuse and you still have power going to the wiper, I would pull the fuse on either side of the wiper fuse socket. With the wiper fuse socket empty, pull the fuse on the left or right one at a time, check for power at the wiper motor each time a fuse is pulled. When you find the power source then you'll need to trace your wiring where the wipers and say for example the dome light meet. I can almost bet the wires have rubbed or something like that and are feeding power to each other. Maybe a melted wire or like what I found on my sons car was that the back side of the fuse block had melted from him running all those high power stereos. He melted the block and the connection melted together. Hope this helps.

Jan 16, 2013 | 1999 Nissan Quest

1 Answer

Ford Expidition 2001, rear wiper is not working, water sprays but no action


The washer and wiper are two separate circuits. At the central junction box check 15A fuse 14 which feeds the battery saver relay. At the battery junction box, check fuse 12 which feeds the rear wiper down and up relays. Rear wiper action is controlled by the generic electronic module (GEM). If the rear wiper switch is set to one of the intermittent positions, the battery saver relay closes to apply power to the wiper down and up relays. The GEM selects high/low or park operation. Note that there is an internal thermal breaker in the rear wiper motor so if everything else checks out, the motor may have overheated and opened that fuse. also, the rear wiper relay(s) could be defective

Sep 28, 2012 | 2001 Ford Expedition

1 Answer

Rear window wiper not working


could be a few things so here goes
rear window wiper relay rear window wiper fuse motor or the connections are loose or rusted get these checked first hope this helps ivan

Sep 26, 2012 | Nissan Cars & Trucks

1 Answer

To replace rear wiper blade on nissan note 2010


Read the manual for my 2010 Note and it says to remove the old one simply rotate the wiper blade anti-clockwise until it comes free. I've done this and it feels like you're going to break it but it just comes free! then to fit the new one simply reverse the rotation. Simples.

Apr 06, 2012 | 2010 Nissan Note 1.6

1 Answer

Rear wiper not working. is it on a different fuse?


you will find that it is broken, you need a new rear wiper motor and wiper arm. the large plastic gear inside the transmission cracks in half. very common problem with the rear saturn wipers. note that parts stores see that the front wiper motor is the same for 91-99 saturns so they think the rear is the same way. however the 94-95 rear wiper motor is different from the 96-99 rear wiper motor. good luck with it, you should be able to find a video on youtube of the procedure to replace it.

Feb 17, 2011 | 1999 Saturn SL

1 Answer

99 Nissan Quest real wiper runs continually when ignition is on


Principles of Operation
Operation of the windshield wiper and washer is controlled by the front wiper/washer amplifier assembly. The front wiper/washer amplifier input comes from the multifunction switch by means of a voltage divider circuit. A constant voltage is applied to the multifunction switch by the front wiper/washer amplifier. When the multifunction switch is moved into the LO, HI, or intermittent position, the voltage is directed through a series of resistors. This results in various voltages being returned to the module for each switch position. The module then grounds the appropriate circuit, based on the voltage signal received back from the multifunction switch. This causes the wipers to run intermittently, or at the appropriate speed. Voltage is supplied to the wiper motor by the CJB fuse F46 (20A).
When the multifunction switch wash button is depressed, it bypasses all of the resistors returning a full voltage signal to the module. The module then grounds the appropriate circuits to operate the windshield washer pump for as long as the switch is depressed. The windshield wiper speed is dependent on the position of the windshield wiper/washer switch.
Voltage for the windshield washer pump is also provided by CJB fuse F46 (20A).
Operation of the rear wiper and washer is controlled by the rear wiper/washer switch.
Voltage is supplied to the rear window wiper motor by the fuse junction panel fuse F44 (10A).
The rear window wiper motor ground is made or broken by the rear wiper/washer switch. When the rear wiper/washer switch is moved into the WIPER position, it grounds the rear window wiper motor circuit, causing the rear window wiper motor to run once every 10-15 seconds.
Voltage to the rear washer pump motor is also supplied by the CJB fuse F44 (10A). The rear washer pump is directly controlled by the rear wiper/washer switch which makes or breaks the ground for the washer pump motor, depending upon its position.
If the vehicle is equipped with a movable liftgate glass, a liftgate glass switch is utilized to prevent rear window wiper operation when the liftgate glass is open. This same switch also causes the rear window wiper to drop down approximately three inches when the liftgate glass latch is released.
------------------------------------------------------------------------------------------
  • The wipers stay on continuously — rear wiper
  • Circuit.
  • Rear wiper/washer switch.
  • GO to Pinpoint Test L .


---------------------------------------------------------------------------------------------
Measure the resistance between rear wiper/washer switch C288 pin 6, component side and rear wiper/washer switch C288 pin 2, component side.
  • Is the resistance less than 5 ohms with the switch depressed, and greater than 10,000 ohms with it released?
sxv~us~en~file=arrow.gif~gen~ref.gifYes GO to L2 .
sxv~us~en~file=arrow.gif~gen~ref.gifNo INSTALL a new rear wiper/washer switch. TEST the system for normal operation.

Measure the resistance between rear wiper/washer switch C288 pin 6, circuit WB08 (BU/YE), harness side and ground.
  • Is the resistance greater than 10,000 ohms?
sxv~us~en~file=arrow.gif~gen~ref.gifYes INSTALL a new rear wiper /washer switch. TEST the system for normal operation.
sxv~us~en~file=arrow.gif~gen~ref.gifNo REPAIR circuit WB08 (BU/YE). TEST the system for normal operation.

65501dd.gif 7e9d21a.gif

Dec 08, 2008 | 1999 Nissan Quest

Not finding what you are looking for?
2008 Nissan Note 1.4 Logo

Related Topics:

1,122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...