Question about 2005 Nissan Altima
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check brake fluid level, add fluid from sealed container if needed.
Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.
Posted on May 13, 2010
SOURCE: yahoo.comi can not reset the
Hello and welcome to FixYa!
As a first course of action, please open the hood and remove the positive battery connector. Let it sit for atleast 5mins. then reconnect it again. This will reset the system and can get rid of the maintenance light.
If the problem still persists, I strongly suggest that you visit a reputable auto repair shop to run a scan on your car and have it resetted. Let's just hope that removing the positive battery connector does the fix.
Hope this helps and thank you for using FixYa! Have a good one!
Posted on May 27, 2011
get an aftermarket deck. If you don't have the bose system, the OEM non bose does NOT play mp3 cds. It only plays audio cds or burned audio cds. It does have the aux jack if you hook up an mp3 player or your iphone/android phone to play Pandora using a headphone cable.
Posted on Jul 24, 2011
Tips for a great answer:
May 28, 2015 | 2010 Nissan Titan
Nov 14, 2014 | 2010 Nissan Rogue
See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.
2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.
3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.
4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.
May 21, 2014 | 2004 Nissan Titan
Feb 21, 2014 | Cars & Trucks
Jun 15, 2011 | 2010 Nissan Frontier
602 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: