Question about 2001 Isuzu Trooper

1 Answer

Timing isuzu trooper

To know how to time trooper.Which marks to use and where they align to marks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just changed the belt in my 2002 Trooper. The new timing belt will have marks on it probably thin white lines. these line will match up with the two cam gears (top right and left) and the crank pulley. The three white lines are spaced differently and the belt will only match up one way. Put the belt next to the existing belt if you can before you start to get an idea how it all lines up. The cam gears and crank all have either a raised line on the metal or a paint mark. By the way, this is a non-interference motor so you won't have to worry about punching a hole in your pistons if you get it wrong. The good thing is as long as you get all three lines lined up, it doesn't matter if the pulleys move (and they will) This job is a two person job and the hardest part is getting the belt tensioner nested and a pin inserted as a keeper. Use a knife and cut the old belt off then unbolt the belt tensioner. Use a vice to slowly compress the tensioner and then insert an allen wrench in the keeper hole. It will be easier if you use small needle nose vice grips to hold the belt in place on each cam pulley. you should be able to finish this job in 3 - 4 hours as long as you know what you are doing and own some metric tools. Good luck.

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the specs settings for a 1998 isuzu trooper timing belt ?


Here are diagrams for the timing belts and the timing marks for replacing the timing belt on the 1998 Isuzu trooper. Hope this helps.

http://www.2carpros.com/diagrams/isuzu/trooper/1998

Aug 04, 2011 | Isuzu Trooper Cars & Trucks

1 Answer

I have isuzu trooper 1988 am changing the timing belt but i forget mark the timing and now i cant get it start.


Take it to a trained mechanic that works on isuzu's. If you have never put a belt on one of these do not attempt it.The cam pulley turns aver three times to one rotation of the camshafts, no marks.

Oct 23, 2010 | 1988 Isuzu Trooper 2 Door

2 Answers

Diagram of markings on timing belt


I repaired a 3.1 4JG2 but the mechanic doesn´t know how to set the injection time. I can see the marks on the crank and camshaft as well as the inyection pulley but if I try to install the belt "just like that", the injection goes wrong with explosions and white smoke. Can anyone help please? Is there any other procedure to follow to time the inyection?
thanks in advance

Jun 30, 2010 | 1996 Isuzu Trooper

2 Answers

How to line up the cams?to put on timing chain.


Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 1999 Isuzu Trooper. It also has additional - very helpful Instructional and Directional Diagrams and Procedures including how to line up the Cams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!



http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/trooper/1999_isuzu_trooper_timing_belt_diagram_marks.htm

Apr 27, 2010 | 1999 Isuzu Trooper

2 Answers

Where is the timing marks in isuzu trooper1995?


the timing marks are on the top (camshaft)and bottom (crankshaft)pulleys,but you may have to clean off the faces to see them,try using chalk.

Apr 18, 2010 | 1995 Isuzu Trooper

1 Answer

I need timing marks for 2001 3.0dohc trooper replaced the head but lost timing marks


My apologies for the delayed response. I am going back to answer unanswered questions.
CLICK
on the following LINK. It has the Timing Mark(s) Diagrams and Steps you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/2001/make/isuzu/model/trooper/2001_isuzu_trooper_timing_belt_diagram_marks.htm

Feb 20, 2010 | 2001 Isuzu Trooper

2 Answers

I need to know about a cam belt change on my Isuzu is it straight forward pul out old one and replace with a new one ??


The engine is timed with holes in the drive wheels. Fitst remove the bottom pully 4 12mm screws not the big nut. Remove plastic cover's 10mm screw's. Turn the engine until the mark on the bottom shaft (crankshaft) is at the top.Their are small holes in the drive wheel's with threaded holes behind them in the engine block screw bolts through the holes to keep the drive wheels from turning Relieve the preasure on the tension pully. Remove the old belt replace tighten the tensioner again.

Sep 18, 2009 | 1992 Isuzu Trooper

1 Answer

Isuzu trooper 2002 RLV engine. camshaft timing


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Feb 21, 2009 | 2002 Isuzu Trooper

1 Answer

Chilton's Manual does not show proper timing diagram


The number one piston is at TDC on the compression stroke when the notch in the crankshaft pulley is aligned with the 0 on the timing plate. and the rotor is pointing at the number one spark plug terminal in the distributor cap.
You will probably have to pull the valve cover to find top dead center.

Dec 02, 2008 | 1988 Isuzu Trooper 2 Door

1 Answer

1999 isuzu trooper 3.5 broken timing belt while driving on freeway


these free wheel when belt breaks they dont bend valves
but you need to remove both rocker covers to align cam gear mark and have cam lobes in these positions
cb47a33.jpg

Jun 16, 2008 | 1999 Isuzu Trooper

Not finding what you are looking for?
2001 Isuzu Trooper Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...