Question about 1997 Buick Skylark
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a free way to find out where it is which is what you'll have to do first, go to any parts place which should have a diagram or they can just tell you over the phone. i will tell you this, hope that it's on the passenger side because if it's on the driver side you will need to pull the dash to get to it. If it's on the passenger side like the blower motor you can just drop the glove box door down to get to it. It looks like a little box woth two or three small hoses or pipes going to it which are failrly easy to disconnect. Hope this helped, good luck!
Posted on Nov 04, 2008
SOURCE: Heater core
Pull the panel under the glove box. You should be able to see the heater core. disconnect the two hoses under the hood on the firewall to the heater core. put a pan below to catch the antifreeze. Replace heater core. reconnect hoses.
Posted on Sep 11, 2009
You will need a piece of pipe about 2" to 3"long that will fit inside the diameter of the two heater hoses at the firewall and two hose clamps. (1)disconnect the two hoses at the firewall; (2)slip a clamp on each hose; (3)slip the piece of pipe into both hose ends to connect the two hoses together; (4)install and tighten clamps on each end of hoses over pipe. (You might want to put a little grease on the pipe for easier removal when you are ready to install new core.) Start engine and check for leaks at the connections.
Posted on Nov 06, 2009
SOURCE: replace heater core
You will need a piece of pipe about 2" to 3"long that will fit
inside the diameter of the two heater hoses at the firewall and two hose
Posted on Feb 02, 2010
it could be the electronic switch down under the dash that is faulty, not allowing the flap to close off and cycle the water through the heater core..
Posted on Feb 07, 2010
Tips for a great answer:
Mar 26, 2011 | 1997 Buick Skylark
Apr 18, 2010 | 1997 Buick Skylark
Feb 02, 2010 | 1997 Buick Skylark
Nov 06, 2009 | 1997 Buick Skylark
Nov 04, 2008 | 1997 Buick Skylark
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: