Question about Cars & Trucks

Open Question

How to remove the plastic engine cover from a hyundai ix35 2010

I want to take cover off to get at rocker cover

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 22 Answers

SOURCE: how does one replace interior overhead lights?

the plastic lens that you press to turn the light off and on can be remove with a pick or small screwdriver pry from the outer edge of it and it will pop off. the light will come out with the socket by twisting.

Posted on Jan 09, 2009

  • 1 Answer

SOURCE: removal plastic engine cover to access air filter

Just give it a firmish pull upward, its held on with spring clips only. The air filters are either side under plastic covers. Youwill need a torxs screwdriver of the correct size

Posted on May 26, 2009

ghost45
  • 1280 Answers

SOURCE: Where can i buy a red engine rocker cover for my

You talking about the Cam Cover? (what used to be called the 'VALVE COVER")? WELL NOW, you can get the part you're talkling about by calling either an authorized Hyundai Parts store, or a junkyard.

Posted on Oct 03, 2009

ghost45
  • 1280 Answers

SOURCE: Locating and changing spark plugs on 2007 Hyundai Sonata 4 cylinder

They are directly below the coil packs (10mm bolts).


a73d0bb.jpg

Posted on Oct 25, 2009

  • 417 Answers

SOURCE: Hyundai Tiburon: Replacing plastic cover that encases everything.

Call around to your local auto wrecker/salvage yards, and check ebay before you go to a Hyundai dealer.

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2007 Hyundai Getz with 38.000 on clock has oily film over engine


could be from a leaking rocker cover gasket at the end of the rocker shaft, loose rocker cover or oil filler cap not properly installed
check operation of the PCV valve to reduce crankcase pressure that may be contributing to the problem

Jun 15, 2016 | 2007 Hyundai Getz 1.6

1 Answer

Hyundai matrix 1.6 head gasket replacement


Unscrew the rocker cover and remove the top casing, most cars now have gasket seal rather than a gasket so check this. Put new gasket in place and then replace top casing, replacing the bolts back in the order they should be in, then put rocker cover back on...
HYUNDAI MATRIX 1 6L 2003 G4ED F4AF3

Jul 25, 2014 | Hyundai Matrix Cars & Trucks

1 Answer

How to remove rocker arm cover, to change spark plugs.


You shouldn't need to remove the rocker arm cover/valve cover. All you should need is a long extention with the spark plug socket on the end of it and just put it down in the hole. You didn't mention the model or year of your hyundai but in many of the Hyundais, this is the case. I know in all cases the valve cover does not need to be removed in order to change the plugs. I hope this helps you and good luck.

Jun 21, 2011 | Hyundai Accent Cars & Trucks

2 Answers

Good morning changing haed gasket on 1.5 hyundai accent how much torque for head bolts and rocker arm bolts


cylinder head bolts 52-55 ft lbs. engine cold 59-63 ft lbs. engine hot

rocker arm shaft bolts 15-20 ft lbs.

intake manifold bolts 11-15 ft lbs.

exhaust manifold bolts 22-30 ft lbs.

valve cover bolts 79-81 in lbs.

May 12, 2011 | Hyundai Motor 1998 Accent

2 Answers

Oil leak from rocker cover


It is most probably the rocker cover gasket. This is enough to install, you just need to source the correct part from your local parts store or dealer. Remove bolts and rocker cover and replace seal. Ensure on replacement, that you use a sealant that is compatible with oxygen sensors, I use PERMATEX ULTRA-BLU RTV Silicone. That seams to work a treat.

Jan 25, 2011 | 2001 Hyundai XG300

2 Answers

Where are the spark plugs located in a 03 hyundai santa fe??


To locate and change the the (4) spark plugs on a 2003 Hyundai 2.4L 4 cylinder engine:
Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.

Nov 21, 2009 | 2003 Hyundai Santa Fe

1 Answer

Where can i buy a red engine rocker cover for my 2004 Hyundai Tiburon. I believe that is what they call them its a cover that covers the spark plugs and other stuff on my 2004 Hyundai Tiburon.


You talking about the Cam Cover? (what used to be called the 'VALVE COVER")? WELL NOW, you can get the part you're talkling about by calling either an authorized Hyundai Parts store, or a junkyard.

Oct 02, 2009 | 2004 Hyundai Tiburon

2 Answers

1995 hyundai scoupe ls mvi


Hi paul this starter will be able to be used. same part number same starter. hope i helped thanks.

Jul 03, 2008 | 1995 Hyundai Scoupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...