Question about 2010 Kia Forte
Checked fuse....it was good......there is no display at all....not even a request for a code...battery was never dead....there is power to the fuse block....hate to think it is fried allready !
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The coed is in the adio book that came with the car.If you have not got that then ask the the person who you bought the car from.Failing that you can get it from your dealers.
Posted on Jul 18, 2009
SOURCE: 2001 Kia Rio Electrical
Hello, Im Ron . Im going to Try to Help you Here. First the Cooling Fan. The Cooling Fan has A Micro-Relay # 37 In the Fuse/Relay Box UNDER_-HOOD IN this type Circuit You Have 3 Step Process to Control the Fan, 1 is the Temperature Sensor, 2 Is the Relay, 3 is the Fan. When Engine Gets Up to Operating temp. 220 Degrees the Sensor Grounds out & signals ECM of Engine
Temp and ECM Tickles the Relay to Turn ON the Fan.
In your Case I would RULE OUT Poor + Terminal Connections @ Battery Accessory Cables. AND Poor - Terminal @ Battery & Or Body Ground
THEN Test the Fan By BYPASSING to it With a Test wire With A + wire to the + side of Fan this is to Make Sure it Works .
Some Techs. Replace Sensor and Relay as A Pair Sense the Two are Fairly Inexpensive, but usualy you can Hear & or Feel the Relay "CLICK" If None Replace it. Shift Lock, Theres A Soliniod at Shifter that Unlocks ti WHEN you Apply the BRAKE, it is Controled By the Brakelight Switch.
I Strongly Suggest That you Check All Harness's From Battery to Interior, & Fuse Box.
I Know this seems Wild But With Limited Resorces & Lititure to work from this Is Where I Go.
Posted on Feb 09, 2009
I have a manual for a '99 model - the one with separate radio/cassette and CD model No's;
OK55Y 66 860
OK55L 66 860
OK55D 66 860
3K55L 66 860
2K55D 66 860
3K55Y 66 860
Under "How to enter your password"
1. press power button & "Test" appears for 5 seconds, and blinks for 5 minutes. If you turn the power button off then back on again within 5 minutes "Code" blinks on the display.
2. enter password using the numbered buttons - press button 1 once to let it know it's the first digit, then press button 1 again however many times to bring up the code for the first digit. Press button 2 to let it know it's the second digit, then again however many times....etc. To enter default 1111 code, press button 1 twice,, 2 twice, 3 twice then 4 twice.
3. when all four digits entered (default is 1111) press SEL button and display should say "GOOD"
4.You get three goes, if still wrong after third attempt "HOLD" then you have to leave it for an hour
Posted on May 02, 2009
Tips for a great answer:
Nov 16, 2016 | Kia Cars & Trucks
Dec 27, 2015 | Kia Cars & Trucks
Nov 15, 2015 | 2010 Kia Forte
Feb 26, 2015 | 2010 Kia Forte
Aug 16, 2014 | 2010 Kia Forte
Jul 05, 2014 | 2011 Kia Forte
Jul 03, 2014 | 2010 Kia Forte
Mar 14, 2014 | 2010 Kia Forte EX
Aug 31, 2013 | 2010 Kia Forte
2,643 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: