Question about 1998 Mercedes-Benz CLK

1 Answer

Replacing timing belt; need timing belt markings for 2000 mazda protege

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 1,007 Answers

If it has the twin camshafts, then you need to align the bottom crankshaft pulley marking (there's only one marking at top dead centre). Then you'll need to align the two camshaft pulleys. You need to use the first two sets of markings and then double check the markings on the camshafts themselves, within the valve cover area. Always double check the crank shaft sensor is aligned properly on re-assembly as misalignment will result in a non-start and you might doubt your own work. Don't worry about timing belt failure or misalignment on the twin cam engine as this is a "safe-engine" and will not result in any damage.

Posted on Oct 30, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 mazda protege correct timing mark alignment


Presuming the timing belt has not been removed or has skipped.
If the belt is removed or skipped this is an interference engine, valves and or pistons could be damaged by turning crankshaft, seek professional help.
Turn crankshaft clockwise and align timing marks (see jpg).
Face the marks (I) and (E) of the camshaft straight up, then align the timing marks with the horizontal surface on the cylinder head.
Pulley boss position pin on the crankshaft should be facing straight up.
25327211-bog4asmiohngydsbtkv4ivhw-1-0.jpg
This is only the beginning of an involved process, 3 pages in shop manual. I recommend getting a manual, many available on line. one typical Mazda 323 Protege Repair Manual 1990 2003
insure that the manual you get has info on your engine.

Dec 18, 2014 | 2000 Mazda Protege

2 Answers

On 2000 mazda protege 1.6 replaced water pump now won't start, thinking timing now out what is timing procedure?


i dont have a more detailed picture of setting the timing marks for the belt so i hope this helpsonetufshoppe_81.gif

Jan 30, 2011 | 2000 Mazda Protege

2 Answers

How to replace a timing belt on a 2000 Mazda Protege


Here is a website that a free manual can be down loaded for your vehicle


http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 01, 2010 | 2000 Mazda Protege

1 Answer

What are the timing marks for a 2000 Mazda protege 1.8L


I assume you are replacing the timing belt, so just wactch the youtube video at the link 1999 03 Mazda Protege 1 8L 2 0L timing belt replacement pt 1

Sep 30, 2009 | 2000 Mazda Protege

1 Answer

Reset timing


timing shift on engine with timing belt are usually caused by worn timing belt teeth and resetting it is usually done by changing the belt. on new car there is no more timing adjustment the computer does all the required change. it is a must that the white mark on the new belt are aligned with each of the gear mark.

Aug 21, 2009 | 2003 Mazda Protege

1 Answer

Need diagram for timing belt for 1991 mazda


here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Aug 09, 2009 | 1991 Mazda Protege

1 Answer

Replacing 2 belts on a 2000 Mazda Protege


I recommend that you go to any Auto Parts store and by a repair user manual for your 2000 Mazda Protege.  They have pictures and arrows and stuff that you will need to do the whole job.  The non-Mazda version will cost approximately $15.00.
Because of the tensioner that may come off when while you are doing these belt changes, it is too complicated to talk you through this.
But with the manual, I am confident you can change them.

Mar 06, 2009 | 2000 Mazda Protege

2 Answers

2000 Mazda Protege replace belts


change the new attentioner,u can,t tight

Nov 29, 2008 | 2000 Mazda Protege

Not finding what you are looking for?
1998 Mercedes-Benz CLK Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...