Question about 2000 Mitsubishi Montero Sport

1 Answer

It dont want to go into drive and when you stop it dont want to gear down to 1st

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 1,007 Answers

If you talking about an automatic gearbox issue, then first check your gearbox oil level and colour. Anything resembling brownish red is dirty oil and should first be replaced. You can also remove the gearbox sump and replace the filter in case it is blocked. Failing this as a remedy, your gearbox may require replacement.

Posted on Oct 30, 2012

  • jerry Michael Ogletree Oct 30, 2012

    done replaced the transmission and the new one is doing the same thing

  • Jamie Alton
    Jamie Alton Oct 30, 2012

    Have you had the gearbox's computer checked or switched to see if it's this issue? Usually the garage will plug in an OBD2 scanner and read any potential fault codes before going ahead with a gearbox replacement.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 honda accord LX at first my sports light flashed well now its constantly on and flickers once when I put the car into gear... but the car will not fully drive in D4 the only way to move it is...


Your transmission computer is failing. A common failure, not everybody figures out you can still manually shift it. Well done. There are companies that repair them or exchange them, look online to find one.

Feb 07, 2015 | 1991 Honda Accord

1 Answer

Wh does 1st gear jump out on accelerator release ?


There are a few things to check. Engine and transmission mounts replace any broken or perished . 1st gear selector shaft has a indent ball and spring to locate the shaft when in gear, check the spring is not broken. The gear box bearings may be worn giving the drive shaft to much end play. also check gear shift linkage is not worn.

Aug 23, 2014 | 1999 Mazda B2500

1 Answer

1994 mazda b2300 it grinds when i down shift to second and first gear unless i drive very slow(like 5 to 10 mpr)


don't shift into 1st until stopped and 10mph or less is your down shift range to 2nd gear from 3rd

Sep 15, 2013 | Mazda Cars & Trucks

1 Answer

1999 3500 dodge 4x4 dually, 47re Tranny. problem existed before and after having my Tranny rebuilt. tried 4 new valve bodies even a new BD VALVE BODY. Truck starts out in 2nd gear when put into...


the transmittion keeps shifting in & out of gear between 45 & 50 mph it shifts to a higher gear then a lower then higher then lower till I get above 50 mph whats the problem & how to fix it

May 03, 2011 | 1999 Dodge Ram

1 Answer

1st gear


High milage may need trans fluid replaced. Not the clutch hydraulic fluid but the gear oil/fluid. Could be the 1st gear syncro is warn too.

Feb 05, 2010 | 1990 Honda Civic

1 Answer

4l60e going from 1st to 3rd and dont have overdrive any more


You most likely have a broken sunshell inside the transmission. They tend to go out when the transmission is shifted to drive when while still rolling in reverse.

Dec 28, 2009 | 1994 Chevrolet C1500

1 Answer

Honda auto gearbox problem


worn shift fork. shifts linkage could be binding.

Mar 29, 2009 | 2000 Honda Accord

2 Answers

95 GMC Sierra 4L60E will not shift down to 1st or up to 4th.


no power stuck in 3rd gear electric shop unless youve burnt it up good luck...www.TransmissionGarage.com

Jan 28, 2009 | 1995 GMC Sierra

1 Answer

1997 suburban 2wheel drive when i put it in drive doesnt want to


Unless you have run over something or something has hit the linkage that you may possibly repair to adjust the gear locations to their proper place on the trans, you must get trans checked out.

Dec 11, 2008 | 1999 GMC Suburban

Not finding what you are looking for?
2000 Mitsubishi Montero Sport Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...