Question about 2000 Dodge Caravan

1 Answer

How do you replace a belt tensioner on a 2000 dodge grand carvan?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Before you start you need to make sure that you have the sticker with proper routing of the belt to install the new tensioner and if not make a picture of it this will save a lot of time. next if you haven't already purchaced your part i would recomend any auto part store it will be cheaper than the dealer.most tensioners can be removed with a 3/8 or 1/2 ratchet or breaker bar to fit into the slot on the tensioner. pull one way or the other to release the tension and remove the belt off the pully then you will need a socket or wrench to remove the pully then install new part and belt, check to make sure belt is on all grooves and pully before starting.

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of cam sensor


check the valley on the left side under the wiring harness

Feb 17, 2013 | 2000 Dodge Grand Caravan

1 Answer

Replace serpentine belt on 2000 dodge grand


ON PASSENGER SIDE YOU NEED SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.PARK VECHICLE ON SOLID LEVEL GROUND.REMOVE WHEEL OR TIRE ON PASSENGER SIDE REMOVE SPLASH SHIELD, THEN PLACE A OPEN END WRENCH ON THE TENSIONER PULLEY LUG ROTATE TENSIONER TO RELIEVE THE BELT TENSION.

Sep 16, 2011 | 2000 Dodge Caravan

2 Answers

The serpentine belt keeps coming off on my 200 dodge grand caravan


then you have a bad tensioner or something isn't straight. look into it a little more and let me know what you see

Jan 07, 2011 | 2000 Dodge Grand Caravan

1 Answer

How do I tighten the A/C belt on a 2000 Dodge grand caravan?


There's a spring loaded Idler pulley that keeps tension on the belt. If the arm that puts the tension on the belt seizes it may not be putting enough tension on the belt. It will need to be replaced.

Dec 12, 2010 | 2000 Dodge Grand Caravan

1 Answer

Need to replace serpentine belt on 2000 dodge caravan,,6 cyl,,air,,,, email cntrywv1@ayhoo.com


OK, do you have a specific question? You'll need to jack up the front right tire and remove it. Pull the wheel well cover off to expose the belt. Use a vice-grip in the tensioner pulley (look for a 1.2 in square on the end of the pulley) to remove tension. Install as the sticker under the hood shows.

Jan 24, 2010 | 2000 Dodge Grand Caravan

1 Answer

1998 Dodge Carvane 3.0 belt brakeing.


I would also check the belt tensioner, it could cause the belt to get misaligned. When the a/c is on, there is more pressure on the belt & tensioner.

Jun 23, 2009 | 1998 Dodge Caravan

1 Answer

How do you replace a serpentine belt on a 2002 dodge grand caravan?


you need a 15mm wrench and skinny hands or a long belt router. place wrench on tensioner bolt and pull to rotate clockwise,at same time undo belt always holding tensioner, after removing belt from a couple pulleys release tensioner and finish removing belt from engine,for installacion reverse procedure.

Jun 10, 2009 | 2000 Dodge Caravan

1 Answer

Need to replace a ignition switch in a grand dodge carvan 2000


it would be easier to call a locksmith and have them come oull the ignition and only cost is about 60.00 if that.they can also put the new one in if you want them to

Feb 03, 2009 | 2000 Dodge Grand Caravan

Not finding what you are looking for?
2000 Dodge Caravan Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...