Question about 2003 Lexus ES 300

Open Question

What is a drive cycle on a 2003 lexus rx300

Just changed the battery. now need to get smog test done

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 54 Answers

SOURCE: when do you change timing belt on 2002 lexus rx300

Every 90,000 miles or 72 months per manufacturers recommendations.

Posted on Feb 22, 2009

Ad
  • 254 Answers

SOURCE: need to disable passenger airbag in lexus 2003 rx300

if you open the passanger door there is a slot for the key. you will need to press the button on the circular key to pull out the real key.  Don't do that!The airbag is a safety device which can save the life of the passenger in case of an accident!However,as the Corvette is a 2-seat car,if you are talking about a child,I strongly recommend you to install an aftermarket Passenger Airbag ON-OFF switch.That is possible even for older car models

Posted on Apr 01, 2009

keithheavili
  • 410 Answers

SOURCE: ? to Replace Timing belt on 2000 Lexus Rx300 with 57,000 miles.

If it is running perfectly I wouldn't think that you would need to replace the timing belt. You shouldn't need to replace that until 100,000-120,000 miles. I would definitely hold off until now unless you have start having some timing problems. Let me know if you have any other questions. Thanks for rating my response and for using FixYa!

Posted on Jul 08, 2009

  • 17 Answers

SOURCE: replace side marker light on lexus rx300

Remove 3 - 4 screws on fender cover close to side marker light. Pull fender cover out a bit for you to use your other hand to reach side marker light. By twisting on one direction and here you go the light out. Replace new bulb and replace everything on reverse order.

Posted on Aug 18, 2009

Murphybanton
  • 2004 Answers

SOURCE: Lexus RX300 engine light n VSC light comes on

VSC means Vehicle Stability Control.

It comes on when the sensor send a signal that the vehicle is not stable on the ground.....check the wheel balancing and alignment and the air pressure of your tires too.

Good luck.

Rate this solution.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Nissan Altima XE need drive cycle to pass smog test after disconnecting battery


If you take your car to smog check station and they talk about drive cycle,that means you need to drive you car on the street at speed of 25 to 35 mph then take it to the freeway and accelerate to get the speed of the rest cars and drive you car at 55 to 65 mph then take it down to the street again and drive a little more the turn it off, this is what the mechanics call drive cycle after this the car if everything is right I mean if there is no any damaged sensor the onboard computer get all the info from the sensors and is ready to the test

Sep 02, 2016 | 2000 Nissan Altima

1 Answer

I need to replace the alternator for my wife's 2003 Lexus RX300. Do I buy a 100 amp or a 130 amp alternator, and does it matter?


you need take old alternator with you to auto parts stores they can match up your alternator give you the correct AMP TYPE, your alternator amps is stamped on the out side alternator housing, the auto parts store can look up right amp alternator for your vechicle.when you say dont matter yes it does if you get wrong type alternator, your battery wont have good charge causing alternator fail early and battery fail early.

Feb 12, 2012 | 2003 Lexus RX 300

1 Answer

Hello, I have a 2003 tiburon and I replaced the battery a little while ago. I have only driven it around town since. It has failed the smog test twice now and I was told that the Drive Cycle has not...


after you replaced battery you have to drive 200-250 miles for computer to get all the info about car - in other words (to engage Drive Cycle). Remember that for next time. Never go for smog test right after you disconnect and reconnect battery- for all cars.

Sep 15, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

My lexus rx300 new belts are squelling,battery light on,


It sounds like you have loose belt(s). When the A/C is turned on, it puts a big load on the belt, if it is loose and starts slipping and squeeling, then the alternator won't turn, so the battery runs down as you drive. Make sure all your belts and battery terminals are tight.

Jul 16, 2010 | 2000 Lexus RX 300

1 Answer

I just replaced the battery in my 2001 Lexus RX300 and now the VSC and Check Engine lights are on. What do I need to do to extinguish lights?


some vehicles will show a trouble code after the battery is disconnected which turns on the check engine light, the code basically tells you that the battery has been disconnect in the last X start cycles, X being the number of start cycles the manufacturer decides on. what I would do is take it to an auto store and have them read and reset the codes, tell them you have done some work and need to see if you fixed the problem

Jul 04, 2010 | 2003 Toyota Camry

1 Answer

Lexus rx300 2002 hard shift between 1st and 2nd. Fluid and filter changed 3000mi ago, car has 93000mi


The 1999-2003 Lexus RX300 models have a common failure of the engine computer that causes the harsh shifting of the transmission. You need to get the computer (ECM - Engine Control Module) rebuilt or replaced before it causes permanent damage to the transmission. Even if the transmission is already ruined, the ECM will still need to be repaired. Most often, the transmission is fine though, and rebuilding the ECM will restore the smooth shifts that the Lexus should have. Circuit Board Medics can rebuild the ECM and reprogram it so that you only have to plug it back in when you get it back. See the link below:

http://circuitboardmedics.com/1999-2003-lexus-rx300-hard-transmission-shifting-ecm-ecu-computer-repair/

Jan 25, 2010 | 2002 Lexus RX 300

1 Answer

2003 rx300 - problem the skid control light came


Most likely a bad wheel speed sensor or wiring harness issue.

Jul 02, 2017 | 2001 Lexus RX 300

1 Answer

Lexus RX300 How do I change the door locking security.


Your door locks are normally programmed by the dealer.
This lock program setting is called speed linked interlock.

Not sure if it can be done without the dealerships hand held programmer,.It would have been done at the time of sale for the first owner.

Call Lexus service to inquire and ask about the sensor beeper shutoff. It was not a standard equipment, factory installed device on the RX300

Oct 28, 2009 | 2001 Lexus RX 300

Not finding what you are looking for?
2003 Lexus ES 300 Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...