Question about 2001 Toyota Camry
Hello! I have 2001 Toyota Camry Gallery with 50,553 miles with bad evaprative emssion control; can I make Toyota pay for this?
Go online and check for recalls but not likely after 10 years, find a reputable shop check evap lines and solenoid, may not be switching, most common is fuel cap, try replacing first according to code(s)
Posted on Oct 29, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
yes there is a button you push it in and it changes from kilometers to odometer, should be in front of closter on the right side, right side of steering wheel.
Posted on Oct 30, 2009
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
SOURCE: sagging ceiling on toyota camry
You can't glue that old headliner material onto the old rotted foam that came off the material anyway or your gonna have a real clumpy mess on your hands. Buy new material at a material shop like Hancocks fabric and put new material. Its to cheap to do it half ......
Posted on Dec 03, 2008
Power steering fluid - Dexron 2 or 3 automatic transmission fluid. Yes transmission fluid. And while you are at it check the fluid level in the transmission.
Since you got the hood up, check the brake fluid, wiper fluid, radiator fluid, battery fluid, oil level.
Posted on Apr 26, 2009
Tips for a great answer:
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
P0441 1998 Toyota Camry Evaporative Emission Control System Incorrect...
Possible causes - Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve
P0441 Toyota Evaporative Emission Control System Incorrect Purge Flow
Jun 01, 2015 | 1998 Toyota Camry
Nov 28, 2012 | Toyota Camry Cars & Trucks
Jun 05, 2012 | 2000 Toyota Camry
Apr 18, 2012 | 2006 Toyota Camry 2.4
May 11, 2011 | 2000 Toyota Camry
Sep 28, 2010 | 1997 Toyota Camry
Dec 21, 2009 | 1995 Toyota Camry
Jun 16, 2009 | 2001 Toyota Camry
Apr 05, 2009 | 1997 Toyota Camry
127 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: