Question about Cars & Trucks

Open Question

Horn Chirp is Annoying. I have 2012 Ford F150. How do I disconnect the horn chirp sound when locking or unlocking the vehicle?

Each time I lock or unlock my vehicle with my electronic key the horn chirps. It is most annoying. There's nothing quiet about it! How can I disconnect the horn chirp?

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ftw1952
  • 10319 Answers

SOURCE: 1995 deville when remotes are used NO horn chirp or light flash

When the car was built they did not have the chirpping option. I had owned a 95 & a 96 both purchased new and that chip you will not here from a factory unit. Maybe aftermarket has that option if you know someone with the chipping noise in their Caddy. I also worked at a Caddy dealership for 7 years and never heard one chirp in any 90's model

Posted on Jan 13, 2010

Testimonial: "Thanks"

Ad
  • 226 Answers

SOURCE: When I hold down remote lock or unlock button to set, horn doesn'

Setting can be accesed through the radio to change options. Follor the owners manual.

Posted on Feb 25, 2010

rbmpreid
  • 44 Answers

SOURCE: my horn doesn't chirp when I lock the doors.

My chevy doesn't chirp on the first press of the lock button, it just locks. If you press it again, then it chirps. To be honest, I like the fact that it doesn't chirp first - that just draws attention to the fact that you left your vehicle.

Posted on Dec 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to stop beep when locking and unlocking camry le 2010


When Horn chirp is enabled, the vehicle horn will chirp on locking and unlocking the vehicle, to enable or disable the horn chirp:

1. Turn headlight switch "OFF"

2. Cycle the ignition switch from "LOCK" to "ON" three times (within 5 seconds) leaving it "ON"

3. The vehicle security indicator will illuminate continuously for 5 seconds

4. During the time the indicator is illuminated, operate the horn(for 1 second). The turn signals will flash once to confirm successful programming.

5. Turn ignition switch to "LOCK" and test system with the remote controls.

To disable horn chirp, repeat the procedure for enabling.

The user manual actually declares customizations of the smartkey must be done by the dealers using special equipment. However, the above procedure works on a variety of years and models. And I see no where in the user manual that refers to the horn and door lock even being a customizable setting.

Aug 10, 2017 | Cars & Trucks

1 Answer

How do I activate my chirp for locking &fun locking my doors on a Ford Focus sports 2012


I have to ask.. why would you want to do that? It's quite annoying.

Aug 31, 2015 | Ford Cars & Trucks

1 Answer

My 2001 ford focus keeps locking. The power locks automatically lock as soon as I unlock them, barely enough time to open door.


Your Focus may be equipped with the autolock feature. Try this:

To deactivate/reactivate the autolock feature using the power door unlock control

You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds.

1. Turn the ignition key to ON.
2. Press the power door unlock control three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition back to ON. The horn will chirp.
6. Press the unlock control, then press the lock control.
The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated.
7. Turn the ignition to OFF. The horn will chirp once to confirm the procedure is complete.

Feb 18, 2015 | 2001 Ford Focus

1 Answer

2006 Kia Amanti lock/unlock chirp does not make sound


my guess is the BCM has a problem. There is a separate horn for the "lock chirp" under the hood on the passenger side. you can check for voltage at the horn but remember to hold in the hood ajar button or the test won't be accurate.

Nov 01, 2014 | 2006 Kia Amanti

1 Answer

Factor disarm wire can not locate it? checked the drivers kick panel, door locks are not disaming the system from the door lock moduel


To turn off the auto locks 1 turn the key on 2 press the unlock button 3 times, 3 turn the key from on to off, 4 press the unlock button 3 times, 5 turn the key back to on and the horn will chirp, 6 press the unlock button, then the lock button. the horn will chirp once if the auto locks are deactivated, or twice one short and one long chirp if activated. 7 turn the key off and the horn will chirp once to confirm exiting the system

Apr 21, 2010 | 1998 Ford Expedition

1 Answer

How do I de-activate the automatic power door locks? 1998 Ford Expedition Eddie Bauer Edition. (also - same thing happens to the 1995 Lincoln Town Car). Any Suggestions?


here is the instructions,i had to type it out because the picture was too large.Its actually for my 2000 Ford,give it a try because it might work.

Deactivating/activating the autolock feature
Before following the procedure,make sure that the ignition is OFF and all vehicle doors are closed.You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated.If the procedure needs to be repeated,you must wait 30 seconds.
1.Turn the ignition key to ON.
2.Press the power door UNLOCK control three times.
3.Turn the ignition key form ON to OFF.
4.Press the power door UNLOCK control three times.
5.Turn the ignition back to ON,The horn will chirp.
6.Press the UNLOCK control,then press the lock control.The horn will chirp once if autolock was deactivated or twice(one short and one long chirp)if autolock was activated.
7.Turn the ignition to OFF.The horn will chirp once to confirm the procedure is complete...Page 89 of the owners manual
about the Town car,try it on there as well,it wouldnt hurt it,i just dont have the manual for it.

Feb 25, 2010 | 1998 Ford Expedition

1 Answer

Have a 2008 Chevy Cobalt, tire sensor is staying on all the tire, not reading the tire pressure at all, has 2 dashes instead. Called and talked to dealership mechanic, he said that re-registering the...


On vehicles equipped with keyless entry, simultaneously press the keyless entry transmitters lock and unlock buttons until a double horn chirp sounds indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated....Next
  • Increase/decrease the tire pressure for 8-10 seconds then wait for a horn chirp. The horn chirp may occur before or up to 30 seconds after the 8-10 second pressure increase/decrease time period has been reached. Once the horn chirp has sounded, the sensor information is learned and the turn signal in the next location to be learned will illuminate....Next
    1. After the horn chirp has sounded and the right front turn signal is illuminated, repeat step 2 for the remaining 3 sensors in the following order:
    1. Right front
    2. Right rear
    3. Left rear
    4. When the left rear sensor has been learned and a double horn chirp has sounded, the learn process is complete and the RCDLR exits the learn mode.
    5. Ignition OFF, adjust all tires to the recommended pressures. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label

    Jul 29, 2009 | 2008 Chevrolet Cobalt

    2 Answers

    Set the combination lock on the driver door of 1999 Ford Explorer


    check your car manuel and it should tell you to solve both

    Jun 09, 2009 | 1999 Ford Explorer

    2 Answers

    Auto Lock Activation


    Deactivating/activating autolock
    There are 3 methods to enable/disable this feature. One through your
    dealer, the second with a power door unlock/lock sequence and the third
    with the keypad.
    Before following the activation or deactivation procedures, make sure
    that the anti-theft system is not armed, ignition is off, and all vehicle
    doors, liftgate and liftgate window are closed.
    Controls and features
    Power door unlock/lock
    procedure
    You must complete steps 1-5 within
    30 seconds or the procedure will
    have to be repeated. If the
    procedure needs to be repeated,
    you must wait 30 seconds.
    1. Turn the ignition key to ON.
    2. Press the power door unlock control three times.
    3. Turn the ignition key from ON to OFF.
    4. Press the power door unlock control three times.
    5. Turn the ignition back to ON. The horn will chirp.
    6. Press the unlock control, then press the lock control. The horn will
    chirp once if autolock was deactivated or twice (one short and one long
    chirp) if autolock was activated.
    7. Turn the ignition to OFF. The horn will chirp once to confirm the
    procedure is complete.
    Keyless entry key pad procedure
    1. Enter 5 digit entry code
    2. Press and hold 7/8 control
    3. Press and release 3/4 control
    4. Release 7/8 control.
    The user should receive a horn
    chirp
    to indicate the system has
    been disabled or a chirp followed by
    a honk to indicate the system has
    been enabled.
    Smart unlock
    This feature prevents the driver’s door from locking while the key is in
    the ignition. This feature will unlock only the driver’s door if the key is in
    the ignition cylinder, the driver’s door is ajar and all doors are locked
    using the interior trim switch. If these conditions are met, the entire
    vehicle will lock and the driver’s door will unlock within 1 second.
    Controls and features
    127

    May 15, 2009 | 2002 Ford Explorer

    1 Answer

    Auto door locking on Ford Mondeo


    It sounds like it has been deactivated so we are going to reactivate the auto lock.

    The numbers I will be saying will have to do with getting this to work so:
    you will need to put the key in to the ignition switch.

    1= is back to listen to the radio
    2= is to get key out
    3= is just before you start
    4= is for starting your car

    When we do this 1 and 4 will not be used
    Do this and we will hope that it works like it should:

    1: Turn the ignition with you key up to on( don't start)

    2: Press the power door lock control 3 times

    3: now turn the key back once (to off position)

    4: Press the power door unlock control 3 times

    5: ok turn the ignition back up 1 time. (The horn should chirp)

    6: Then press the unlock control, then press the lock control, again (horn will chirp 1's) If auto lock
    was activated.

    7: Turn the ignition back 1's, Then the horn should chirp once to confirm the procedure was completed.
    Nikki2913

    Nov 23, 2008 | 2006 Ford Focus

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    131 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...