Question about 2002 Ford E250

Open Question

Location the blower resistor on a e250 - 2002 Ford E250

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mutthu273
  • 3 Answers

SOURCE: location of blower motor resistor

in china

Posted on Jun 16, 2008

alicantecoli
  • 22114 Answers

SOURCE: blower resistor. where is it located

built into the blower motor

Posted on Nov 03, 2009

roniecon
  • 6826 Answers

SOURCE: On a 2003 Ford Econoline 3/4 ton E250, replaced

The blower is bad,or the blower switch,normaly,the blower resister only controls lower speeds,so check the switch,and the blower.

Posted on Mar 12, 2010

  • 691 Answers

SOURCE: Where's an 2005 Ford Focus Blower Motor resistor

Might be the Resistor pack located close to the blower. It has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. The blower connector may be loose. Let me know what you find.

Posted on Aug 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi , I have a 2009 Ford E250 van and all of a sudden the switch that controls the blower motor doesnt activate the blower. I have heat if the vehicle is moving , but its not blowing heat from the vent


There is a fuse, may not be solely for the blower but it has to be fuseed! Anyway I would suggest checking all fuse's both inside and outside boxes first then locate blower relay swoop with the one next to it and test blower if its stil not working its the fan speed switch! They gave trouble on previous models! ! You'd be very unlucky for a 2009 fan motor to fail...good luck.

Jan 22, 2013 | Cars & Trucks

1 Answer

Remove heater control switch


Before removing the heater switch on this 2006 citroen hdi I would first have the blower motor checked and the most common reason for this and other blower problems would be the blower resistor.

Your blower works on and off at times, first locate the blower motor and the resistor. the blower motor is located on the heater box, look under the pass/side of the dash, you may have to remove under dash cover to see blower.
When you have located the blower now look to the side on the heater box, there you will see a connector plug, it plugs into a connection on the heater box, this will be the resistor, the resistor slides into heater box and the end of it bolts to box to hold it in place and then the connector plugs into it, if you can not locate it then follow wires that plug into blower , follow wires back they will lead you to resistor,
next time blower does not work wiggle connector to resistor and see if blower turns on, if it does then resistor is the problem. also unplug resistor plug at resistor and check for any burning of connectors at plug and inside resistor.

I would bet its a bad resistor or the plug is brunt due to high draw from bad connections, if plug has burn damage to connectors then replace the plug along with resistor.

Jul 08, 2012 | 2006 Citroen C5 HDi

1 Answer

Blowing fuses on blower motor 2006 e250 econoline


Both are possible.But it can be blower motor issue mostly.Its taking too load and that's blowing the fuse.How to Test and Replace Blower motor on car? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-and-replace-blower-motor-on.html--------- How to Replace Blower Motor Wheel? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-blower-motor-wheel.html
----------

Also more help solutions recommended. Click the link below :---
Blower motor replacing for all vehicles? http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html
----------Blower motor Resistor shorting problem? http://schematicsdiagram.blogspot.com/2011/12/blower-motor-resistor-shorting-problem.html
--------This will help.Thanks.

Jan 25, 2012 | 2006 Ford E-250

1 Answer

Ford e-250 blower motor works when it wants to is there a resister some where that need to be changed the switch does not feel bad but it worked on high only the quit / now it comes on when it wants...


You are on the right track, this sounds like a bad resistor i have replaced many. heres a diagram and picture of the resistor you forgot to list the year so i will use a 1999 e250 they are about all the same, if you locate the blowermotor in the rear of the engine compartment on the pass/side to the right next to blower at the bottom is the resistor. hope this is helpful good day.johnjohn2_164.gifjohnjohn2_143.jpg

Sep 24, 2011 | Ford E-Series Cars & Trucks

2 Answers

I need to locate my blower motor resistor on my 1999 S-10. do u know where it is located on my s-10?


The resistor is located under the hood on the passenger side. At the back of the engine compartment you need to locate the airbox it can be identified by a circular piece that's right beside the fender on the firewall (this is your blower motor) to the right if it (looking from the front of the truck) about 4 -6" you will see a wire plug. Unplug this connector and locate the four screws that attach it to the air box. Remove these screws and pull the resistor from the housing.

Hope helps (remember to rate this answer).

Dec 13, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

On a 2003 Ford Econoline 3/4 ton E250, replaced resistor module and checked fuses (blower) but still have no blower function?????


The blower is bad,or the blower switch,normaly,the blower resister only controls lower speeds,so check the switch,and the blower.

Mar 12, 2010 | 2003 Ford E250

1 Answer

Getting cold


it is a 60 amp fuse in the power distribution box under the hood, if it is ok jump 12 volts to blower motor, if it runs ok then u will need to replace the blower motor speed control resistor located near the blower motor in the heater housing.

Dec 12, 2008 | 1993 Ford Econoline

1 Answer

Where is the heater blower motor resistor located


if you locate the blower motor the rester is the wire that atachec to blower motor fallow wire till you find a circuit bord this is ur resistor

Dec 06, 2008 | 1999 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...