Question about Cars & Trucks

Open Question

Replace brake caliper for ford f 150 fx4 - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

c17hydro
  • 2984 Answers

SOURCE: Replacing the front brake caliper on a 1999 Ford Escort

Very simple. Have the proper tools for one. Two...lay cardboard down because the brake dust will make some cruddy marks on the pavement. Three...are replacing the WHOL:E caliper or just replacing/resealing the piston?

Very simple to do, just make sure you block the rear wheels or front (depending on which one you are doing).

Unbolt the two carrier bolts, one upper and one lower. These are commonly hex head or "allen" head fastners. Next, have a small container under the hose you will be disconnecting. I hope you have some help to bleed.....you will need to do so. Get the extra brake fluid ahead of time....that's all you need to do really...and once you unblot and disconnect, the brake caliper should be sitting in your lap!

Posted on Mar 12, 2009

  • 129 Answers

SOURCE: 2004 Ford F-150 extended cab FX4. 4WD problem

The malfunctioning part in my case is what ford calls the "integrated wheel end" which locs the weel hub on the four wheel drive in or out as need. Part is available from Ford and cost about $110.00. I will do this repair myself.

Posted on Apr 10, 2009

  • 316 Answers

SOURCE: 2004 Ford F-150 extended cab FX4. 4WD problem

Your front hubs are automatic locking hubs, and the gears are hard nylon. These hubs break very easily, therefore causing you to lose your front wheel drive in 4 high, or 4 low. If you replace the hubs with "WARN (name brand) " manual locking hubs, you will never have the issue again. Of course, you will have to get out of the truck and manually lock the hubs, but they are metal gears, and much more durable. I've personally seen the issue several times, and changing the hubs has resolved the issue every time.

Posted on May 01, 2009

  • 93 Answers

SOURCE: 2004 fx4 4x4 f 150 trans fault code hi temp

hi there. ...i can advise you that i have replaceed several transmission fluid temperature sensors (tft) for faulty readings.it is inside transmission and can be accessed by removing pan...hope this helps!...good luck

Posted on Jun 06, 2009

  • 23 Answers

SOURCE: stuck calipers

Brake lines are not releasing fluid back to master cylinder. Open bleeder and see if wheel will turn. If it does replace brake line to caliper

Posted on May 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order 2005 f 150 fx4


Click here Lisa for firing order.

Feb 04, 2013 | 2005 Ford F-150

1 Answer

On a 1995 f-150 4wd, does the caliper anchor bracket bolt on to the spindle, or is it on peice? I have a bolt broken off in the brake caliper and wondering if I can change the bracket, or have to dril


brka calipers are bolted on to the anchor point because you have to remove them to get the disc off. Normally you can remove the bolts and lift the caliper off the disc. If the broken bolt is in this part the next step is to place a hose clam on the brake line to stop fluid leaking out when you remove the caliper for repair. Drill out and use an ezi out tool . Remember that replacement bolts have to be grade 8 quality by law.If the broken bit is in the anchor point simply push the caliper out of the way and drill . The bolt still has to be Grade 8 quality

Feb 03, 2013 | 1994 Ford F150 Styleside Supercab

1 Answer

2006 F150 FX4 Let off the brake pedal and turn as


its probably your calipal or cran shaft

Apr 11, 2010 | 2006 Ford F-150

3 Answers

2008 f150 shakes when braking, chaged brakes and


makes no sense other than maybe the anti lock system is messing up

Mar 28, 2010 | 2008 Ford F-150

1 Answer

Brakes are dragging on 93 f 150


Replace the brake caliper in question, check the calipers by jacking up front of truck and try turning wheel if it offers to much resistance this is the caliper to replace do the same to the other side unfortunately when calipers start to stick they need to be rebuilt or replaced there are no quick fixes that work, rockauto.com has decent prices but compare after shipping costs to your local auto parts store.

Jul 03, 2009 | 1993 Ford F150 SuperCab

1 Answer

I need to repalce the rear brake pads. I have 4 wheel discs and cannot figure out how to get the caliper off to replace the pads.


Look at the back side of the calipers you will see 2- 12mm bolts that hold the caliper on to the brake pad bracket just unbolt and replace pads. Make sure you have a C clap handy to compress the caliper pisiton back into the caliper.

Jun 15, 2009 | 2005 Ford F-150

1 Answer

Changing front brakes on my 2006 ford f150


I have had to replace mine on my 2004 model, I normally will use a block of wood with a clamp. the block of wood protects the inside of the caliper and twist the C-clamp until it is flush in the Brake caliper. Install your new pads and re-assemble, duplicate for the other side. after you have done this, start the vehicle and step on the brake pedal several times, this insures that the brakes will set against the rotor. Good Luck

Jun 13, 2009 | 2006 Ford F-150

1 Answer

I cannot figure out how to get the calipers off of the rear of an F150 FX4. Are the bolts covered somehow?


The bolts should not be covered by anything. You can locate them on the back side of the calipers where the bracket wings down toward the axle.

May 30, 2009 | 2005 Ford F-150

1 Answer

Rear brakes on 2005 F-150


If you can't compress the piston with reasonable ease...you may have a frozen caliper. It does not "screw in" like GM models. It either presses back into caliper or it doesn't. If it's that hard to press it back in...get a new caliper.

Chris

Aug 02, 2008 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...