Question about Cars & Trucks

Open Question

Turn signal flasher for 2006 chevy uplander

Turn signal lites work sometimes and sometimes it don't. no blown bulbs

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2841 Answers

SOURCE: my turn signal flashers won't work. the bulbs are

The Flasher Relay is more than likely defective. Replace it. Turn signal flasher located Front seating area, driver side, under dash, mounted on passenger side of steering column. Curtorsey Auto Zone

Posted on Nov 29, 2009

Testimonial: "thank you this is very helpful. i might be able to fix it myself. being a women i really do appreciate. thanks again"

Ad
  • 118 Answers

SOURCE: 1998 Cavalier rear turn signal doesn't work

The turn signal switches are known to go bad, try to use the turn signal switch and jiggle the lever after clicking to the left turn. Replace signal switch assembly.

Posted on Jul 20, 2009

  • 1168 Answers

SOURCE: Turn signals not working.All bulbs are good,no

The emergency flasher and the turn signal flasher are two separate items. You could have a defective T/S flasher.

Posted on Oct 30, 2009

smuschanow
  • 20 Answers

SOURCE: My 97 Licoln Town car 4 way flashers, turn signals

Replace both lights at the back of your car. The fact that you have steady non-flashing lights at the front and no lights at the back is a troubleshooting tool to let you know the back lights are bad.

Posted on Dec 19, 2009

  • 12173 Answers

SOURCE: light bulb for turn signal under mirror 2006 chevy

not bulb led light part of mirror dealer, some auto stores or online parts

Posted on Jan 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of turn signal flasher 2006 HHR chevy where is it located


Unlike older vehicles, the flashers on the HHR are controlled by the BCM.

If your turn signals are blinking rapidly, check the bulb connections for signs of corrosion. Clean any corroded connectors & add some dielectric grease before replacing.

Feb 13, 2015 | 2006 Chevrolet HHR

1 Answer

My turn signals don't work and I've checked the bulbs, fuses & flasher.


About all that is left on the list is the turn signal switch.
Do you have power in and out of the switch ?

Feb 04, 2013 | 1995 Buick Skylark

1 Answer

/'left front turn signal works but not when headlights are on


1. check your turn signal light bulbs to see if one is burned out or partly burned out. One filament may be broken. Do it with lights on and off. Check brake lights. If one not working that is the problem bulb. Check front and back lights.

2. replace your turn signal flashers in fuse panel

Oct 04, 2012 | 2006 Chevrolet Uplander

3 Answers

I have a 1995 chevy cavalier and the turn signals just stay on and don't blink. I have changed the flasher and the multi function switch and still no luck


First, is it doing it on BOTH isdes or just on one side? Example: turn signnals flash OK when turning left, but only come on and stay on when turning right. If it is doing this, then you most likely have either a blown bulb or a bad bulb socket on the side that is not flashing. You need to check both the FRONT and REAR bulbs to make sure they are all functioning properly.
If it is doing it on BOTH sides, then you either have a bad flasher, or at least 2 bulbs burned out (one or more on each side).

Are you sure you replaced the correct flasher? The flasher for the HAZZARD lights is plugged into the convinience center under the left side of the dash. If this is the flasher you replaced, it is the wrong one.
The turn signal flasher is mounted to the driver's knee bolster bar near the steering column. It is held to the bar with a clip. (see diagram)

9_25_2011_3_20_38_pm.gif

Sep 25, 2011 | 1995 Chevrolet Cavalier

1 Answer

My left turn signals don't work.you can hear the clicker working normal and the courning lite come on. If you leave the signal switch on the turn lite will flash once in a while and also the lite on...


You most likely have a bad bulb, if the front bulb goes the rear wont work and vise versa both bulbs must be good to complete the cirrcut. Even though you have no lights you should still hear the flasher relay. Bulbs are cheap just replace both and you'll be good to go. Good luck

Aug 18, 2011 | 2001 Buick Park Avenue

1 Answer

The turn signals don't work front or back. they have new bulbs and a new flasher relay


sometime the combination switch can cause this problem , alot of times u can turn your hazard lite switch on and off a couple of times and the turn signals will go back to working ,

Jun 27, 2011 | 1995 Chevrolet Corsica

2 Answers

The turn singnals don't flash on my 2004 chevy impala


It's time to replace the flasher relay.The signal flasher is located under the dash near the steering column.Also check for the indicator bulb.Replace them if damaged.
Front Turn Signal Light Bulb Size: 3457ALL
Rear Turn Signal Light Bulb Size: 3057
Hope this helps.Your valuable feedback would be appreciated.Thanks

Jun 11, 2011 | 2004 Chevrolet Impala

3 Answers

Car sat for a while turn signal wont work but 4 way flashers do


common on olds make sure single contact bulbs & dobble contacts are in correct spots
and problem is in the front signals connecters remove bulbs and ull see burnt plastic
replace or clean

May 02, 2011 | 1994 Oldsmobile Cutlass Supreme

2 Answers

Where is the turn signal flasher located?


You more likely have a bulb that is no good. The next time your signals aren't working, pull over and check to see which bulb isn't working. Make sure the turn signal is on while checking. It should only be the left or right. Not both. Sometimes you can see the blown bulb with the hazards on depending on your model vehicle. Simply check the bulb thats not blinking for a tight fit. Then replace it if thats not the cure.

Apr 30, 2010 | 2006 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...