Question about 1999 Dodge Durango
You should have chech engine light on if not they have a fuse under the hood if there is a light on you need to get the code read it will tell what it is your problem good luck...
Posted on Oct 29, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Dodge Durango
All you need to do is Remove the POSATIVE cable from the battery for about 25 seconds then reconnect it. This will reset the computer and everything else!
Posted on Jan 30, 2009
I put in a new crank positioning sensor and it fixed my problem. 42.00 dollars from NAPA. took about 2 hours to change it.
Posted on May 02, 2009
If you look down on the radiator, on the left side, there is a larrge hose coming out of the radiator toward the engine. Where the hose ends there is a housing with 2 bolts. The Thermostat is found under that. Remove the 2 bolts an replace the thermostat. Unles your arms are very long and thin, you will probably need to do this from under the car.
Perfect time to flush/fill all coolant. Check and replace any needed hoses/clamps.
Posted on May 05, 2009
if i am not mistaken the fuel filter is built into the fuel pump. which requires you to drop the tank and replace both.
Posted on Jun 01, 2009
durangos have many problems with the windows motors and regulators, I know for personal experience , because I have one, ...when you try rolling the windows down do you hear any noise coming from inside the door..if so.. the cable is busted ..you will need the windows regulator, if no, is probably the motor..you will have to check for power and ground right at the motor connector...if power and ground are present, then you need a motor ....in mine ,I pull the motor and cleaned , and they have been fine for more than a year, I starter with one and them had to do the same to all of them..hope this help
Posted on Aug 02, 2009
Tips for a great answer:
Feb 15, 2015 | 2000 Dodge Durango
Sep 26, 2011 | 2000 Dodge Durango
Mar 11, 2011 | 2000 Dodge Durango
P0300?? Multiple Cylinder Misfire
P0301?? Cylinder #1 Misfire
P0307?? Cylinder #7 Misfire
are the codes start with the basics inspect plugs wires cap rotor and if all checks out do a compression test
Dec 31, 2010 | 2000 Dodge Durango
Jul 21, 2010 | 2000 Dodge Durango
156 people viewed this question
Usually answered in minutes!